GE Cooktop Parts

Dual Radiant Element - 9 Inch

1 Review

Part Number: WB30T10099

This is a large dual haliant element with a limiter or sensor for glass cooktops and freestanding ranges. It is a 2500-watt part. The inner diameter measures 9 inches, while the outer diameter measures 10 inches. If there is no heat generated from your element, you may need to replace this part. You may also need to check your socket or infinite switch. It is located under the glass cooktop of your appliance. Be sure to unplug or cut the circuit breaker to your appliance before starting this repair. Before replacing this part, be sure your appliance is getting enough power. If it is receiving less than the required 220 volts of alternating current, the surface element will not work.

Burner Cap

3 Reviews

Part Number: WB29K10024

This is a burner cap for your gas range. The cap acts as a cover for the burner head. If your old burner cap is damaged or missing, this is the part that will replace it. The cap is black in color and about 3 and a half inches in diameter. This is a quality OEM part sourced directly from the manufacturer. This cap is sold individually.

Dual Radiant Element - 9 Inch

30 Reviews

Part Number: WB30T10133

The dual radiant element for your range or cooktop provides the heat that you cook with. It is found under the main cooktop. If your element will not heat, you will need to replace it with this part. This radiant element is 9 inches in diameter and is the larger of the two element sizes on your range. Be sure to disconnect your range from the power source before completing this repair. This radiant element is sold individually.

Burner Head - Large - 12K

1 Review

Part Number: WB16T10046

This part is the replacement surface burner head for your gas range. It is silver in color and is approximately 3.5 inches in diameter. This burner is sold individually. The burner head distributes gas to create an even flame across the cooking area. If you notice that your food is not cooking evenly, or you are not getting an evenly distributed flame, you may need to replace the burner. The burner is located beneath the burner cap, below the grate. To remove the burner, simply remove the grate and the burner cap, then lift the burner head out. Replace it with the new burner and reinstall the cap and grate. This is an OEM part sourced directly from the manufacturer.

Surface Element - 6 Inch - 240V

Part Number: WB30M1

This Y-frame 6-inch surface element is a genuine OEM part. It has five turns, a metallic center medallion and carries 240 volts. If your element is not heating, you may need to replace it. Please be sure to disconnect the power to your range before starting your repair.

Selector Switch

Part Number: WB24X449

Flat Style Oven Igniter Kit

8 Reviews

Part Number: WB13K21

The flat style oven igniter is used to ignite the gas to light the oven burner in your range. If your oven is not heating, check the igniter to make sure it is glowing. If the igniter is glowing and your oven is not heating, then your igniter is not strong enough to heat the oven and you will need to replace it. When replacing the igniter please be very careful not to touch the black element part of the igniter as it is very fragile. The part measures approximately 3-3/4" in length and the amperage range is 3.3 to 3.6. The kit comes with a mounting bracket and a wire connector with a plug. *Please note: the connector plug might need to be removed and spliced to the range wiring using porcelain wire nuts. This is a genuine OEM part.

Burner Head - Medium - 9500

Part Number: WB16K10055

Top Burner Spark Electrode

Part Number: WB13K10014

The spark electrode helps create a spark to ignite the burner to produce the flame for cooking. If your gas igniter glows but will not light, you may need to replace this part. Please remember to disconnect the power and the gas supply to the range before you start your repair. This is a genuine OEM part and is sold individually.

Burner Cap - Black - Medium - 9500 BTU

1 Review

Part Number: WB29K10023

The burner cap sits on top of the burner base and acts as a cover for the burner head. It helps protect the burner head from spills and helps spread the burner flame for even cooking. It is black in color and just over 3 inches in diameter. If your old burner cap is damaged or missing, this is the part that will replace it. This is an OEM part sourced directly from the manufacturer and is sold individually.