Hello!

You're visiting the Easy Appliance Parts site in Canada.

Would you like to shop on the U.S. site?

Go to U.S. site
Stay on this site

10685500510 Kenmore Refrigerator Parts List

1-15 of 301

Door cam - black (refrigerator or freezer lower door closing cam. A new screw is needed to mount the cam. Consider lubricating the cam during installation.)

The refrigerator uses a set of cams to help with the closing of the doors and help to keep them in position. These cams are mounted around the door pivot point and are made up of a series of ridges and valleys to help keep the door in position. If your refrigerator uses a door closer, the door should shut all by itself. This part is black in color, made of plastic, and is sold individually. This is a genuine OEM part. Note: As per the manufacturer a new screw is needed to mount the door cam. This door cam is sold individually.

Easy Part #:
EAP11752991
Availability:
In Stock
Price:
$11.97

Defrost timer (refrigerator defrost timer kit. This timer is designed for continuous or cumulative run defrost systems. Turn the dial on the timer clockwise to advan)

This 120 volt, 60Hz defrost timer acts like a clock, continually advances and alternates between activating the cooling cycle and the defrost heater. If the refrigerator is too warm, freezer section too warm or freezer not defrosting you might need to replace the defrost timer. This is a genuine OEM part. Disconnect the power to the refrigerator before starting the repair. 

Easy Part #:
EAP11723171
Availability:
In Stock
Price:
$39.75

Replacement ice maker (refrigerator icemaker. This item does not include a new shut off arm.)

This 8-cube ice maker is used to help produce ice for your refrigerator. The ice maker receives water from the water inlet valve and will freeze the water until ice cubes are formed. Once the water has been frozen the ice cubes will be ejected from the mold into the ice bucket and will refill with water to repeat the process until the ice bucket is full. This ice maker does not include the bail or shut off arm. You can reuse the arms for your old ice maker or you can also order them separately if required. It does come complete with flat and round plug wiring harness, the mounting hardware, and the instructions. The harness can be reused. This ice maker will not fit refrigerators that have the ice auger mounted on the door. If your ice maker is not making ice you may need to replace this part. Please remember to disconnect the power and water supply before starting your repair. This ice maker is a genuine OEM part.

Easy Part #:
EAP358591
Availability:
In Stock
Price:
$168.93

Touch-up paint - white (white touch-up paint)

This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, and freezers. This is a genuine OEM part and includes a brush applicator. Please remember to wear gloves to protect your hands when applying this paint.

Easy Part #:
EAP385132
Availability:
In Stock
Price:
$9.19

Thermostat assembly (refrigerator/freezer temperature control thermostat. Temperature issues can be caused by this thermostat.)

The thermostat will sense the temperature increase in the evaporator during the defrost cycle and will cycle the defrost heater off after the ice or frost is melted.

Easy Part #:
EAP11739232
Availability:
In Stock
Price:
$111.33

Icemaker control assembly (refrigerator icemaker control module and motor assembly. Located under the white cover of icemaker and controls ice ejector bar, heater and water inle)

This part is used to help tell the icemaker what to do - it turns the timing cams and the ejector blades. It also controls the heater, the water inlet valve, the cube size, and cube ejection. The control assembly is located under the white cover of the ice maker. If the ice maker is making too much ice or not making ice at all, you may need to replace the control assembly. The motor is not sold separately. This is a genuine OEM part. Please make sure you disconnect power to the refrigerator before starting your repair.

Easy Part #:
EAP2341896
Availability:
In Stock
Price:
$136.14

Ice maker water fill tube kit (icemaker water fill tube with compression nut.)

The ice maker fill tube is used to supply water to the ice maker during the fill cycle and is located in the back wall of your refrigerator/freezer. The fill tube is 10” long and includes a compression nut and a tube insert. If the fill tube is cracked or leaking water you will need to replace it. This part is white in color, made of plastic, and is a genuine OEM part. Please remember to disconnect the power and shut off the water supply before starting your repair.

Easy Part #:
EAP11739222
Availability:
In Stock
Price:
$11.65

Screw (screw with plastic washer 8-18 x 1/2)

Metallic screw that is less than an inch long. Does not include the plastic washer.

Easy Part #:
EAP11742721
Availability:
In Stock
Price:
$9.09

Water fill cup and bearing (bearing and cup assembly for icemaker)

The ice maker fill cup and bearing dispenses the water into the ice mold during the fill cycle. If your ice maker isn’t making ice, is leaking, or the cup or bearing is cracked, you will need to replace this part. This part is three inches long, white in color, and is made of plastic. It is a genuine OEM part. Please remember to disconnect the power and water supply to your refrigerator before starting the repair.

Easy Part #:
EAP11743318
Availability:
In Stock
Price:
$46.41

Cycling thermostat (thermostat for modular icemaker, with new clips)

The ice maker thermostat, also known as bi-metal device, regulates and controls the activation of the icemaker ejection cycle. The thermostat lets the ice maker know when it is cold enough to produce ice. If your ice maker is not making ice or not dispensing ice, you may need to replace the thermostat. This is a genuine OEM part and comes with two retaining clips. Please remember to disconnect power to your refrigerator before starting your repair.

Easy Part #:
EAP11743313
Availability:
In Stock
Price:
$71.32
Easy Part #:
EAP358630
Availability:
In Stock
Price:
$95.97

Water tube kit (1/4 inch plastic water line kit, approximately 72 inches. Tubing will need to be cut to match existing length.)

The water tubing is made of plastic and goes between the water valve and the back of your refrigerator. The tubing is 72” in length, 1/4 inch in diameter, and comes with 2 inserts. This tube may be longer than the original tube and may need to be cut to fit your appliance. The water tube transports water to the ice and water dispensers. If there is no water going to the ice maker, your refrigerator is leaking, or if the ice and water dispensers are not dispensing properly, you may need to replace this tube kit. This part is an OEM part directly from the manufacturer. Please remember to shut off the water supply and to disconnect the power to your refrigerator before starting your repair.

Easy Part #:
EAP11730901
Availability:
In Stock
Price:
$41.49
Easy Part #:
EAP16730711
Availability:
Special Order
Price:
$34.51

Shelf support stud - white (shelf support)

This kit contains two options - One that is a push and turn and the other that is a screw in.

Easy Part #:
EAP372050
Availability:
In Stock
Price:
$29.34

Door light switch (door switch)

The white door light switch is in the control panel section of your refrigerator. The light will turn on when you open the door. If the light doesn?t turn on when the door is open the contacts in the switch could be burnt out and will need to be replaced. This is a genuine OEM part. Please remember to disconnect the power to your refrigerator before starting your repair.

Easy Part #:
EAP11738900
Availability:
In Stock
Price:
$34.85
1-15 of 301