10693391 Kenmore Refrigerator Parts List

Search the entire 10693391 by part description. Keep descriptions simple, e.g. "belt" or "pump". Need help?

Capacitor (compressor run capacitor)

The run capacitor is attached to the compressor. This part helps the compressor kick on and off while maintaining a constant temperature to keep things frozen in your freezer. If your refrigerator is too warm, will not start, or your freezer section is too warm, you may need to replace this part. This is a genuine OEM part. Please remember to disconnect power to your refrigerator before starting your repair.

Easy Part #:: EAP11757023

Availability:: In Stock - Ships Today

Price:: $90.93

Refrigerator door switch (refrigerator door switch. This switch activates the refrigerator light when the door is open.)

Door switch turns the light off when you close the door.

Easy Part #:: EAP12728638

Availability:: In Stock - Ships Today

Price:: $44.00

Replacement ice maker (refrigerator icemaker. This item does not include a new shut off arm.)

This 8-cube ice maker is used to help produce ice for your refrigerator. The ice maker receives water from the water inlet valve and will freeze the water until ice cubes are formed. Once the water has been frozen the ice cubes will be ejected from the mold into the ice bucket and will refill with water to repeat the process until the ice bucket is full. This ice maker does not include the bail or shut off arm. You can reuse the arms for your old ice maker or you can also order them separately if required. It does come complete with flat and round plug wiring harness, the mounting hardware, and the instructions. The harness can be reused. This ice maker will not fit refrigerators that have the ice auger mounted on the door. If your ice maker is not making ice you may need to replace this part. Please remember to disconnect the power and water supply before starting your repair. This ice maker is a genuine OEM part.

Easy Part #:: EAP358591

Availability:: In Stock - Ships Today

Price:: $168.93

Touch-up paint - white (white touch-up paint)

This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, and freezers. This is a genuine OEM part and includes a brush applicator. Please remember to wear gloves to protect your hands when applying this paint.

Easy Part #:: EAP385132

Availability:: In Stock - Ships Today

Price:: $8.72

Icemaker control assembly (refrigerator icemaker control module and motor assembly. Located under the white cover of icemaker and controls ice ejector bar, heater and water inle)

This part is used to help tell the icemaker what to do - it turns the timing cams and the ejector blades. It also controls the heater, the water inlet valve, the cube size, and cube ejection. The control assembly is located under the white cover of the ice maker. If the ice maker is making too much ice or not making ice at all, you may need to replace the control assembly. The motor is not sold separately. This is a genuine OEM part. Please make sure you disconnect power to the refrigerator before starting your repair.

Easy Part #:: EAP2341896

Availability:: In Stock - Ships Today

Price:: $136.14

Hinge bracket (door stop bracket)

This part is used to support the hinge.

Easy Part #:: EAP11739061

Availability:: In Stock - Ships Today

Price:: $14.78

End cap trim piece (endcap trim piece, white)

The end cap trim piece slides into the door trim to help hold the door shelf stay in place. When installing the new end cap trim piece, make sure the two small taps are facing up. This part can be used for the left or right side. The end cap trim piece is white in color, made of plastic and almost 2” long. This is a genuine OEM part and is sold individually.

Easy Part #:: EAP11738928

Availability:: In Stock - Ships Today

Price:: $13.69

Ice maker water fill tube kit (icemaker water fill tube with compression nut.)

The ice maker fill tube is used to supply water to the ice maker during the fill cycle and is located in the back wall of your refrigerator/freezer. The fill tube is 10” long and includes a compression nut and a tube insert. If the fill tube is cracked or leaking water you will need to replace it. This part is white in color, made of plastic, and is a genuine OEM part. Please remember to disconnect the power and shut off the water supply before starting your repair.

Easy Part #:: EAP11739222

Availability:: In Stock - Ships Today

Price:: $11.65

Crisper pan (white crisper drawer)

Sold individually.

Easy Part #:: EAP11738958

Availability:: In Stock - Ships Today

Price:: $113.19

Clip-on bimetal defrost thermostat with leads (defrost thermostat assembly, clip-on)

This part acts as a safety device against over-heating in case of mechanical failure.

Easy Part #:: EAP11742470

Availability:: In Stock - Ships Today

Price:: $46.18

Defrost timer kit (defrost timer assembly, 8 hour. Turn the dial on the timer clockwise to advance it into and out of defrost.)

This device acts like a clock. It continually advances and alternates between activating the cooling cycle and the defrost heater.

Easy Part #:: EAP11739056

Availability:: In Stock - Ships Today

Price:: $75.00

Screw (screw with plastic washer 8-18 x 1/2)

Metallic screw that is less than an inch long. Does not include the plastic washer.

Easy Part #:: EAP11742721

Availability:: In Stock - Ships Today

Price:: $9.09

Water fill cup and bearing (bearing and cup assembly for icemaker)

The ice maker fill cup and bearing dispenses the water into the ice mold during the fill cycle. If your ice maker isn’t making ice, is leaking, or the cup or bearing is cracked, you will need to replace this part. This part is three inches long, white in color, and is made of plastic. It is a genuine OEM part. Please remember to disconnect the power and water supply to your refrigerator before starting the repair.

Easy Part #:: EAP11743318

Availability:: In Stock - Ships Today

Price:: $46.41

Cycling thermostat (thermostat for modular icemaker, with new clips)

The ice maker thermostat, also known as bi-metal device, regulates and controls the activation of the icemaker ejection cycle. The thermostat lets the ice maker know when it is cold enough to produce ice. If your ice maker is not making ice or not dispensing ice, you may need to replace the thermostat. This is a genuine OEM part and comes with two retaining clips. Please remember to disconnect power to your refrigerator before starting your repair.

Easy Part #:: EAP11743313

Availability:: On Order

Price:: $71.29

Water tube kit (1/4 inch plastic water line kit, approximately 72 inches. Tubing will need to be cut to match existing length.)

The water tubing is made of plastic and goes between the water valve and the back of your refrigerator. The tubing is 72” in length, 1/4 inch in diameter, and comes with 2 inserts. This tube may be longer than the original tube and may need to be cut to fit your appliance. The water tube transports water to the ice and water dispensers. If there is no water going to the ice maker, your refrigerator is leaking, or if the ice and water dispensers are not dispensing properly, you may need to replace this tube kit. This part is an OEM part directly from the manufacturer. Please remember to shut off the water supply and to disconnect the power to your refrigerator before starting your repair.