Hello!

You're visiting the Easy Appliance Parts site in Canada.

Would you like to shop on the U.S. site?

Go to U.S. site
Stay on this site

1108293130 Kenmore Washer Parts List

Search the entire 1108293130 by part description. Keep descriptions simple, e.g. "belt" or "pump". Need help?
< PREV 1 2 3 4 5 6 ... 9
1-15 of 130

Agitator directional cogs (washing machine agitator directional cogs. These parts are also referred to as "dog ears." 4 per package.)

These agitator directional cogs are commonly referred to as dog ears. They come four in a package and are usually used with direct drive washing machines. When the teeth on the outer edge are worn down the cogs will not engage with the upper agitator, causing it not to agitate properly. It is recommended to replace all four at the same time. These agitator directional cogs are ?-inch high and 1-inchlong and they are a genuine OEM part.

Easy Part #:
EAP388034
Availability:
In Stock
Price:
$4.93

Water inlet valve with mounting bracket (washing machine water inlet valve kit with bracket. A long or slow fill cycle is often due to a restricted water valve. The valve should never be disa)

The water fill valve kit attaches the water lines on the back of your washer. The attaching solenoids on the valve open and close according to the desired temperature, or amount of water needed. This kit includes a blue body fill valve, a mounting bracket and a screw. The valve body of this part could be blue or green in color. There are two ports for water to enter, and this valve is compatible with a half inch ID hose. It has two 3/4-11x1/2 NHT hose threads. This is a genuine OEM part. Please remember to disconnect the power and the water supply before starting your repair.

Easy Part #:
EAP334646
Availability:
In Stock
Price:
$40.53

Agitator bolt (washer agitator bolt with rubber gasket and thread sealant. Head is 7/16 inches in diameter.)

This kit contains one screw with rubber gasket and threaded sealant. The screw head is 7/16".

Easy Part #:
EAP11741866
Availability:
In Stock
Price:
$8.09

Touch-up paint - white (white touch-up paint)

This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, and freezers. This is a genuine OEM part and includes a brush applicator. Please remember to wear gloves to protect your hands when applying this paint.

Easy Part #:
EAP385132
Availability:
In Stock
Price:
$9.19

Centerpost gasket (washing machine main tub seal)

Also known as Main Outer Tub Seal. This part helps to prevent leaking from the bottom of the tub.

Easy Part #:
EAP11723081
Availability:
In Stock
Price:
$6.61

Agitator repair kit (washing machine agitator repair kit with reversing dog ears and, long cam, and retainer.)

This agitator repair kit comes with a long cam, a thrust spacer and four dogs ears (agitator cogs). This repair kit is used to move the upper agitator and it connects the base of the agitator with the agitator top (mover). This part has been updated by the manufacture.

Easy Part #:
EAP334622
Availability:
In Stock
Price:
$41.91

Thrust spacer (thrust washer for washing machine agitator. This thrust washer is found between the upper and lower sections of the agitator.)

This white thrust spacer is made of plastic and is also commonly referred to as a retainer ring. It is approximately 2 1/2-inch in diameter. The thrust spacer is used in the agitator assembly between the agitator and the auger. The thrust spacer supports the agitator auger as it moves. It is used in many direct drive washer machine models. If your washer will not agitate or is noisy, you may need to replace the thrust spacer. Please be sure to disconnect the power to your washer before starting your repair. You may need agitator grease for the repair. This is a genuine OEM part.

Easy Part #:
EAP334562
Availability:
In Stock
Price:
$7.03

Drain hose (connector, drain hose)

It connects from the pump to the back panel. The clamp is not included.

Easy Part #:
EAP11753688
Availability:
In Stock
Price:
$44.72

Fabric softener dispenser (washing machine fabric softener dispenser for top of agitator. If the fabric softener does not dispense properly then the dispenser may clogged.)

This parts fits on top of the agitator.

Easy Part #:
EAP11743341
Availability:
In Stock
Price:
$13.45

Drive block - 2 5/16 inch high (washer drive block for inner tub. A worn drive block may cause the washer to spin slowly, causing the clothes to be soaked at the end of the cycle.)

This part is for large capacity belt drive and direct drive appliances.

Easy Part #:
EAP11741977
Availability:
In Stock
Price:
$27.30

Hose clamp

This hose clamp expands from half an inch to an inch in diameter. It is made entirely of metal and is intended for use with Maytag washing machines to secure the end of the drain hose to the pump drain port. Please make sure to disconnect the power to your washer before you start your repair. This hose clamp is a genuine OEM part and is sold individually.

Easy Part #:
EAP11743008
Availability:
In Stock
Price:
$9.73

Cover screw (screw)

Sold individually.

Easy Part #:
EAP11740701
Availability:
In Stock
Price:
$9.13

Foot, front - single (adjustable leveling leg for washing machine. This leveling leg has a rubber foot.)

The adjustable leveling leg is used to support and keep your washer level. It also allows you to adjust the height of your washer. If your washer is shaking, vibrating, or moving during operation you may need to replace this part. This part has a rubber foot, almost 3” long and is made of metal and rubber. This is a genuine OEM part and is sold individually.

Easy Part #:
EAP11747965
Availability:
In Stock
Price:
$8.56

Lid switch assembly (washing machine lid switch assembly. If the washer does not spin the lid switch may be defective.)

This part makes sure that the lid is shut before allowing the machine to start or agitate.

Easy Part #:
EAP334600
Availability:
In Stock
Price:
$51.64

Inner tub filter plug kit (filter plug kit for inner tub, replaces round filter assembly)

Kit contains 4 plugs - replaces the lint filter that goes under spin basket. The filter under the spin basket is no longer required. Replaces round filter assembly.

Easy Part #:
EAP334684
Availability:
In Stock
Price:
$26.30
< PREV 1 2 3 4 5 6 ... 9
1-15 of 130