41779042900 Kenmore Dryer Parts List

1-15 of 100

Rear drum bearing kit (dryer rear drum bearing kit. The holes in the metal plate are not threaded. Use the self tapping screws in the kit to thread the plate.)

This rear drum bearing kit includes one bearing, one ball shaft, one ball bearing, one ball bearing retainer, a small tube of high temperature lubricant, and installation screws. The support bearing helps support the dryer drum to rotate quietly and smoothly during operation. The bearing attaches on the inside of the rear panel of the dryer cabinet. Over time the drum bearing will wear out. This kit will help keep your dryer running as smoothly as possible with as little noise as possible. This is a genuine OEM part. Please remember to disconnect the power before starting your repair.

Easy Part #:

EAP459829

Availability:

In Stock

Price:

$23.60

Drum belt (dryer drum belt, length 87.75" x width 1/4". If the drum does not turn, but you can hear the motor running then there is a good chance the belt has br)

This dryer drum belt is 88 3/4 inches long, and is 1/4 inch wide. The belt attaches to the motor pulley and helps rotate the drum as the motor rotates. If the drum does not rotate and you can still hear the motor running, the belt may have broken and will need to be replaced. This is a genuine OEM part. Please remember to disconnect the power to your dryer before starting the repair.

Easy Part #:

EAP1148434

Availability:

In Stock

Price:

$18.61

Upper drum glide (front upper felt glide pad. Includes nylon glides, adhesive, and installation instructions. These drum glides help to support the front of the dryer d)

The upper drum felt glide kit helps to support the front drum as it rotates smoothly and quietly while operating. This kit includes three glides with the adhesive. If your dryer won’t tumble or is noisy, the glide could be worn down causing you to hear a metal on metal noise and will need to be replaced. The drum glide is a genuine OEM part and sold individually. Please remember to disconnect the power to the dryer before starting your repair.

Easy Part #:

EAP470317

Availability:

In Stock

Price:

$33.06

Drum support bearing (rear bearing support for dryer drum.)

The rear drum support bearing helps support the dryer drum to rotate quietly and smoothly during operation. The bearing attaches on the inside of the rear panel of the dryer cabinet. If your dryer is making unusual noises or will not tumble, you may need to replace this part. It is white in color and made of plastic. This is a genuine OEM part. Please remember to disconnect the power to your dryer before starting the repair.

Easy Part #:

EAP418807

Availability:

In Stock

Price:

$4.81

Front lower drum seal (lower felt seal, dryer drum front)

This part helps to keep the dryer running as quietly as possible.

Easy Part #:

EAP460194

Availability:

In Stock

Price:

$36.21

Turn - type start switch (start switch, turn type)

This part is used to start the dryer once you have selected a setting on the timer.

Easy Part #:

EAP975832

Availability:

In Stock

Price:

$37.25

M series ignition coil kit (dryer gas valve solenoid coil kit. The kit includes both 2 and 3 wire coils. If the dryer does not heat or heats intermittently the gas valve coils ma)

The gas dryer ignition coil set comes with two ignition coils: one three-terminal boost/hold coil, and one two-terminal secondary coil. If it takes too long to dry or there is no heat, the coils may be bad and will need to be replaced. When the coils go bad they won’t hold the gas valve open properly. Usually only one of them burns out but you should replace them as a set. Both must be operational for the gas valve to open. This is a genuine OEM part. Please remember to disconnect the power to your dryer before starting the repair.

Easy Part #:

EAP470049

Availability:

In Stock

Price:

$21.97

Screw

This is a replacement screw for your washer or dryer. The screw is approximately half an inch in length and is a Phillips-head screw. It screws in from the outside of the drum, into the vane/baffle. The main reason you would replace this screw is if the old screw is missing or damaged. This part is sold individually and is an OEM part sourced directly from the manufacturer.

Easy Part #:

EAP417463

Availability:

In Stock

Price:

$9.84

Lint filter (lint filter assembly)

This white dryer lint filter screen collects lint as it passes through the dryer vent.

Easy Part #:

EAP417841

Availability:

In Stock

Price:

$25.97

Door strike (strike, dryer door)

The door strike works in conjunction with the dryer door. The male piece of the door strike is the piece that activates the door switch once the dryer door is closed. If your dryer won’t start, or the door won’t open/close, you may need to replace the door strike. This part is made from metal and measures approximately 1 inch. This is a genuine OEM part. Please remember to disconnect the power to the dryer before starting your repair.

Easy Part #:

EAP455020

Availability:

In Stock

Price:

$13.44

Door handle (door handle, white)

This part is the replacement door handle for your dryer. It is made of white plastic and measures about 2 ½ inches long and 4 inches wide. The door handle allows you to open and close the dryer door. If it is cracked, damaged, or missing, this is the part that will replace it. Many of our customers rated this repair easy, as the new handle should simply snap into place. This is an OEM part sourced directly from the manufacturer.

Easy Part #:

EAP418388

Availability:

In Stock

Price:

$41.33

Idler arm assembly (idler pulley assembly for dryer drum belt)

Part may differ in color from image. Please note that this is only a cosmetic difference.

Easy Part #:

EAP1156706

Availability:

In Stock

Price:

$43.87

Drive motor with pulley

This motor has a double shaft.

Easy Part #:

EAP418132

Availability:

In Stock

Price:

$155.27

High temperature adhesive (high temperature adhesive for installing rubber and felt seals)

The high temperature adhesive is used to create a heat resistant bond between felt seals and rubber gaskets on your appliance. This adhesive is made to withstand hot temperatures. This tube contains one ounce of adhesive. Before starting your repair, it is recommended to wear gloves and ensure that your working area is clean and dry.

Easy Part #:

EAP474458

Availability:

In Stock

Price:

$45.57

1-15 of 100