66512773K312 Kenmore Dishwasher Parts List

Search the entire 66512773K312 by part description. Keep descriptions simple, e.g. "belt" or "pump". Need help?

Dishwasher inlet valve (dishwasher water inlet valve)

This water inlet valve should be located behind the lower kick plate panel in either the right or left corner. The attaching solenoids on the valve open and close according to the desired amount of water needed.

Easy Part #:: EAP12578165

Availability:: In Stock - Ships Today

Price:: $73.53

Seal (dishwasher door seal, lower)

This part is the replacement door seal for your dishwasher. It is approximately 22 inches long and 2 inches wide. This door seal is made of gray plastic and is found at the bottom the dishwasher. The door seal is designed to seal the gap between the dishwasher tub and outer edge of the door. This helps to prevent leaks when your dishwasher is running. A leaking dishwasher is a good indication that the door seal is damaged. This seal is sold individually and is an OEM part sourced directly from the manufacturer.

Easy Part #:: EAP11755651

Availability:: In Stock - Ships Today

Price:: $12.79

Drain hose (dishwasher drain hose)

This part is used to drain water from your dishwasher.

Easy Part #:: EAP11756139

Availability:: In Stock - Ships Today

Price:: $69.22

Touch-up paint - white (appliance touch-up paint, 0.6-oz (white))

This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, and freezers. This is a genuine OEM part and includes a brush applicator. Please remember to wear gloves to protect your hands when applying this paint.

Easy Part #:: EAP385132

Availability:: In Stock - Ships Today

Price:: $9.19

Retainer clip - white (dishwasher access panel retainer (white))

This part is used to hold the access panel in place. Sold individually.

Easy Part #:: EAP11755737

Availability:: In Stock - Ships Today

Price:: $8.51

Retainer clip - black (dishwasher access panel retainer (black))

This part is used to hold the access panel in place. Sold individually.

Easy Part #:: EAP11755736

Availability:: In Stock - Ships Today

Price:: $30.72

Inlet fill hose (dishwasher water inlet tubing)

This fill hose is a genuine OEM replacement part for your dishwasher. The hose is made of black plastic, and is accordion-style, for ease of movement within your dishwasher. To replace the fill hose, you will need a 1/4 inch nut driver, Channellock pliers, and a Phillips screwdriver. Replacing this part will require some disassembly, such as removing the water inlet valve from the fill hose, and the clamps which secure the hose in place. Reuse your existing clamps when securing your new fill hose in place.

Easy Part #:: EAP11738178

Availability:: In Stock - Ships Today

Price:: $88.76

Push-in retainer clip (dishwasher upper spray arm retainer)

Sold individually.

Easy Part #:: EAP11741622

Availability:: In Stock - Ships Today

Price:: $44.84

Water inlet (dishwasher water inlet port)

This is connected to the water valve, is located on the side of your tub and allows water to enter your dishwasher. ***Note: This part does not include the inlet gasket - must order separately.

Easy Part #:: EAP11750066

Availability:: In Stock - Ships Today

Price:: $91.76

Manifold (dishwasher spray arm manifold)

Easy Part #:: EAP11753224

Availability:: In Stock - Ships Today

Price:: $106.27

Upper spray arm (dishwasher spray arm)

The upper spray arm rotates and sprays water to clean the dishes inside the dishwasher tub. If your dishes are not being cleaned properly, you should check if there is an issue with the spray arm. To check your spray arm, make sure the spray arms can move evenly and freely on their bearing rings and mounting brackets. Remove your spray arm and check to ensure they are straight and undamaged. This spray arm is made of high-quality plastic and is just over 5 inches long.

Easy Part #:: EAP11752935

Availability:: In Stock - Ships Today

Price:: $68.35

Hose clamp (appliance hose clamp)

This hose clamp expands from half an inch to an inch in diameter. It is made entirely of metal and is intended for use with Maytag washing machines to secure the end of the drain hose to the pump drain port. Please make sure to disconnect the power to your washer before you start your repair. This hose clamp is a genuine OEM part and is sold individually.