66513633100 Kenmore Trash Compactor Parts List

Search the entire 66513633100 by part description. Keep descriptions simple, e.g. "belt" or "pump". Need help?

15 inch compactor bags - 15 pack (tough slip-n-grip plastic compactor bags. 15 white bags with ties. Patented design keeps bags from slipping. Tough 2.5 mil laminated plastic. Pleated)

These tough Slip-N-Grip plastic compactor bags are used to hold the trash until you are ready to discard of your waste. The bags will fit most 15" rectangular compactors including Kenmore, Whirlpool, KitchenAid, and Jenn Air. The compactor bags are white in color and twist ties are included. The bags measure 15” wide, 33” high and they come in a pack of 15. This is a genuine OEM part.

Easy Part #:: EAP1964579

Availability:: In Stock

Price:: $30.37

Touch-up paint - white (white touch-up paint)

This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, and freezers. This is a genuine OEM part and includes a brush applicator. Please remember to wear gloves to protect your hands when applying this paint.

Easy Part #:: EAP385132

Availability:: In Stock

Price:: $9.19

15 inch white plastic compactor bags - 60 pack (compactor bag, 15 inch plastic, pack of 60)

The tough Slip-N-Grip white plastic compactor bags are designed to prevent the bag from slipping down in to the compactor and come in a pack of 60. The compactor bags hold the compacted trash until you are ready to dispose of it. These bags measure 16” wide by 32” high and will fit most 15” rectangular compactors. This is a genuine OEM part.

Easy Part #:: EAP1964577

Availability:: No Longer Available

Drive gear kit (ram drive gear kit, trash compactor)

This part is located at the bottom of your compactor and helps the drive motor power the compacting ram. If the drive gear is broken, damaged, or noisy, we suggest replacing it right away to avoid causing any more issues with your trash compactor. This kit includes the gears, washers, retainer clip, ram stop, and ram cam. This drive gear kit is a genuine OEM part, is white in color and made from plastic. Please remember to disconnect the power before starting your repair.

Easy Part #:: EAP398589

Availability:: In Stock

Price:: $76.06

Foot, front - single (adjustable leveling leg for washing machine. This leveling leg has a rubber foot.)

The adjustable leveling leg is used to support and keep your washer level. It also allows you to adjust the height of your washer. If your washer is shaking, vibrating, or moving during operation you may need to replace this part. This part has a rubber foot, almost 3” long and is made of metal and rubber. This is a genuine OEM part and is sold individually.

Easy Part #:: EAP11747965

Availability:: In Stock

Price:: $8.56

Screw, 8/18 x 3/8 (screw, 10-24 3/8)

This screw is sold individually.

Easy Part #:: EAP11746840

Availability:: In Stock

Price:: $6.22

15" compactor bag carrier with easy grip handles (trash compactor bag caddy - fits around trash compactor bag inside a 15-inch compactor. Features 'easy-grip' handles - an easier way to take the fille)

The compactor bag carrier is located under the plastic trash bag. It will fit around a trash compactor bag inside a 15” compactor and helps making removing the trash bag from the compactor easier with the easy grip handles. This carrier is bisque in color and measures 8” wide x 16” high x 11” deep. You should replace the bag carrier if it is damaged or missing. This is the bag carrier only, compactor bags are not included, they must be ordered separately. This is a genuine OEM part.

Easy Part #:: EAP1782408

Availability:: In Stock

Price:: $41.25

Off-switch actuator kit (new integrated pedal switch kit for trash compactor)

This kit contains the normally closed switch, toe guard, template, 2 screws and actuator. NOTE: This part has been redesigned by the manufacturer but will still function the same as the original part.

Easy Part #:: EAP3489806

Availability:: In Stock

Price:: $135.70

Directional switch (top limit and directional switch for trash compactor. This directional switch interrupts the flow of current to the motor when the compacting ram reac)

This part reverses the motor direction when the trach compactor has reached the top of the drawer. If the cycle is not being completed properly, is making loud noises, or does not shut off, the top limit directional switch may need to be tested by using a multimeter to test the continuity. If there is no electrical path in the switch, it will need to be replaced.

Easy Part #:: EAP11744742

Availability:: In Stock

Price:: $73.68

Drawer roller (track support roller assembly)

The drawer roller is used for your trash compactor. The roller attaches to the bottom of the lower frame to allow the container drawer to slide in and out easily. If the roller jams up, it can keep the drawer from opening correctly and you may need to replace the roller. This part measures approximately 1” in diameter and is sold individually. This is a genuine OEM part.

Easy Part #:: EAP11747573

Availability:: In Stock

Price:: $18.84

Power nut kit (trunnion power nut kit for ram drive screw)

If your trash compactor ram gets stuck or does not stop at the end of the compacting cycle you may need to replace the power nut. The power nut is intended for use with trash compactors. This part is attached to the side of the ram where it is threaded. When the power screw rotates, it is fed through the power nut which pulls the ram down to compress the trash. This power nut is white in color and made from plastic. Please remember to disconnect the power to the trash compactor before starting your repair.

Easy Part #:: EAP11747554

Availability:: In Stock

Price:: $86.24

Drive motor (trash compactor replacement drive motor kit)

The drive motor operates the trash compactor press, also known as a ram, that helps compact the trash. When in use the drive motor will activate the press by turning the gears and a chain, causing it to lower into the trash, compact it and then raise back up. If your compactor is noisy or not compacting, you may need to replace the motor. This is a genuine OEM part. Please remember to disconnect the power to the trash compactor before starting the repair.