498610 LG Washer Dryer Combo Parts List

Search the entire 498610 by part description. Keep descriptions simple, e.g. "belt" or "pump". Need help?

Washing machine drain pump (washer drain pump)

This drain pump motor helps expel water from the washing machine and is activated after the spin speed is maintained for a specific period. If your washer will not drain, is noisy, leaking, or pumps but will not spin, you may need to replace the drain pump motor. This is a genuine OEM part. Please remember to shut off the water supply and disconnect the power to the washer before starting your repair. Note: Pump casing is not included.

Easy Part #:: EAP3579318

Availability:: In Stock - Ships Today

Price:: $140.89

Sensor assembly (rotor position sensor assembly)

The motor rotor position sensor monitors the direction and speed of the spinning rotor and communicates this information to the electronic control board. If your washer is displaying an LE error code on your control display, the sensor has failed and will need to be replaced. This is a genuine OEM part sourced directly from the manufacturer. Please remember to disconnect the power to your washer before starting your repair.

Easy Part #:: EAP16556422

Availability:: In Stock - Ships Today

Price:: $56.67

Water inlet valve hot (LG washer inlet valve)

The hot water inlet valve is located on the back of the washer and it helps control the amount of water that enters into the washer. The valve has a standard hose fitting inlet, 1 water outlet, 120 volts and 6 watts. If the washer is filling slowly or not at all, the solenoid may have gone bad and you will need to replace the inlet valve. The valve measures approximately 3” L x 2 3/4” W. Please remember to disconnect the water and power to the washer before starting the repair. This is a genuine OEM hot water inlet valve.

Easy Part #:: EAP3527427

Availability:: In Stock - Ships Today

Price:: $68.41

Rear tub gasket

The rear tub gasket is located between the drive shaft and the rear outer tub to form a watertight seal to prevent water from leaking. It is recommended to replace the two bearings at the same time as replacing the tub gasket. The gasket is black in color and measures approximately 3” in diameter. This is a genuine OEM part. Please make sure you disconnect the power and water supply to the washer before starting your repair.

Easy Part #:: EAP3522855

Availability:: In Stock - Ships Today

Price:: $41.27

Spider

This part is called a spider, spinner support or rear drum support for your washer. It is triangular, with three arms, and it is made of metal. The washer spinner supports and spins the tub while the washer is running. If you notice that your washer shakes or moves during operation, or if it is excessively noisy, you may need to replace the spider. This part is sold individually and is an authentic OEM part sourced directly from the manufacturer.

Easy Part #:: EAP11759952

Availability:: In Stock - Ships Today

Price:: $274.11

Gasket (washer rear tub gasket 4036er4001b)

The outer tub gasket is used to create a seal between the front and rear outer tub to prevent water leaking. The tub gasket is located between the front outer tub and the rear outer tub. If your washer starts leaking from between the outer and rear tub, the tub gasket could be worn out or damaged and will need to be replaced. This part is black in color and made of rubber. This is a genuine OEM part. Please remember to disconnect the power and water supply to the washer before starting the repair.

Easy Part #:: EAP3522859

Availability:: In Stock - Ships Today

Price:: $38.40

Door lock assembly (LG washer door lock)

Easy Part #:: EAP3533609

Availability:: In Stock - Ships Today

Price:: $98.38

Shock absorber kit (damper asm)

This kit includes 1 shock absorber and 2 mounting pins.

Easy Part #:: EAP3522315

Availability:: Special Order

Price:: $58.14

Noise filter assembly (filter assembly)

Easy Part #:: EAP3528920

Availability:: In Stock - Ships Today

Price:: $110.72

Bearing,ball (ball bearing)

Tub bearing. This part is very difficult to install. The manufacturer recommends replacing the complete rear tub and bearing assembly.

Easy Part #:: EAP3522899

Availability:: In Stock - Ships Today

Price:: $116.70

Rotor assembly (wm-motor)

This rotor assembly is a manufacturer-approved replacement part for your washing machine. The rotor is an important part to rotate the tub during the wash cycle. It can need replacing if the magnets or splines become damaged. Unplug the washer before beginning this repair. To complete this repair, you will need a Phillips screwdriver, a 17mm socket wrench, and thread-locking fluid.

Easy Part #:: EAP3522944

Availability:: In Stock - Ships Today

Price:: $210.27

Tub-to-pump drain hose (washer tub-to-pump hose)

This hose has bellows to allow for flexibility during the wash and spin cycles.

Easy Part #:: EAP3523345

Availability:: In Stock - Ships Today

Price:: $47.92

Cap,drain hose (washer drain pump filter drain hose plug)

This drain hose plug, also known as a hose cap, is a genuine OEM part for your washing machine. This plug caps the drain hose from the pump housing, and helps prevent leaks from your washer. Before beginning this repair, make sure the power and water sources to your washer are shut off. To access the pump housing, open the pump filter cover, pull out the drain hose, remove the old plug and replace it, first draining the remaining water from the drain hose.

Easy Part #:: EAP3635866

Availability:: In Stock - Ships Today

Price:: $9.23

Harness,multi (LG multi harness)

Easy Part #:: EAP3530237

Availability:: In Stock - Ships Today

Price:: $64.02

Detergent dispenser (detergent box assembly)

The blue plastic detergent dispenser holds the detergent and then dispenses it into the washer during the wash cycle. If the detergent dispenser is broken, lost, or if the detergent is not dispensed during the wash cycle, you may need to replace it. The dispenser is approximately 4”wide, 4.5” long, 2” tall and is an genuine OEM part.