3550A Whirlpool Refrigerator Parts List

Search the entire 3550A by part description. Keep descriptions simple, e.g. "belt" or "pump". Need help?

Icemaker control assembly

This part is used to help tell the icemaker what to do - it turns the timing cams and the ejector blades. It also controls the heater, the water inlet valve, the cube size, and cube ejection. The control assembly is located under the white cover of the ice maker. If the ice maker is making too much ice or not making ice at all, you may need to replace the control assembly. The motor is not sold separately. This is a genuine OEM part. Please make sure you disconnect power to the refrigerator before starting your repair.

Easy Part #:: EAP2341896

Availability:: In Stock - Ships Today

Price:: $136.20

Water fill cup and bearing

The ice maker fill cup and bearing dispenses the water into the ice mold during the fill cycle. If your ice maker isn’t making ice, is leaking, or the cup or bearing is cracked, you will need to replace this part. This part is three inches long, white in color, and is made of plastic. It is a genuine OEM part. Please remember to disconnect the power and water supply to your refrigerator before starting the repair.

Easy Part #:: EAP11743318

Availability:: In Stock - Ships Today

Price:: $46.34

Cycling thermostat

The ice maker thermostat, also known as bi-metal device, regulates and controls the activation of the icemaker ejection cycle. The thermostat lets the ice maker know when it is cold enough to produce ice. If your ice maker is not making ice or not dispensing ice, you may need to replace the thermostat. This is a genuine OEM part and comes with two retaining clips. Please remember to disconnect power to your refrigerator before starting your repair.

Easy Part #:: EAP11743313

Availability:: In Stock - Ships Today

Price:: $71.35

Water tube kit

The water tubing is made of plastic and goes between the water valve and the back of your refrigerator. The tubing is 72” in length, 1/4 inch in diameter, and comes with 2 inserts. This tube may be longer than the original tube and may need to be cut to fit your appliance. The water tube transports water to the ice and water dispensers. If there is no water going to the ice maker, your refrigerator is leaking, or if the ice and water dispensers are not dispensing properly, you may need to replace this tube kit. This part is an OEM part directly from the manufacturer. Please remember to shut off the water supply and to disconnect the power to your refrigerator before starting your repair.

Easy Part #:: EAP11730901

Availability:: In Stock - Ships Today

Price:: $41.43

Ice maker wire harness

This part connects to the electrical and allows power to flow through your appliance.

Easy Part #:: EAP11747840

Availability:: On Order

Price:: $58.82

Water inlet valve

This part releases water from the supply line when it's activated. This single outlet water valve is intended for use with some ice makers and refrigerators.

Easy Part #:: EAP11726315

Availability:: In Stock - Ships Today

Price:: $211.08

Ice mold

This ice cube mold and heater assembly has a flake resistant surface with separations that mold eight ice crescents and is used with modular style icemakers on some refrigerators. The mold heater is an electrical device that thaws the ice quickly, so it can be released from the icemaker mold. If your ice maker isn’t making ice you may need to replace this part. Please remember to disconnect the power and water supply before starting your repair.

Easy Part #:: EAP11749915

Availability:: In Stock - Ships Today

Price:: $190.46

Ice stripper

This part strips ice from the icemaker mold during the ejection cycle to prevent ice pieces from falling back into the mold. Once removed from the mold, the ice pieces are then deposited into the ice bucket ready to be dispensed. If your ice maker is not making any ice you may need to replace this part. The part is white in color and is approximately 9-inch long. The ice stripper is a genuine OEM part. Please remember to disconnect power to your refrigerator before starting your repair.

Easy Part #:: EAP11739041

Availability:: In Stock - Ships Today

Price:: $73.18

Compression nut

This single ¼” compression nut is used to connect the lines that supply water to the correct components, the water dispenser and the ice maker, with the plastic water line of the icemaker assembly. This is a genuine OEM part. Please remember to disconnect the power and water supply to the refrigerator before starting your repair.