Most Popular Parts
These are the most commonly purchased repair parts for ABB2522FEQ11.
-
(17)
This is the center support rail for the refrigerator crisper drawer. This rail supports center of the crisper frame.
-
(11)
This board will need to be programmed upon installation. The electronic control board is used in refrigerators to monitor and manage the temperature settings, such as cooling or defrosting times. If your fridge or freezer is too warm, too cold, is not defrosting, will not start, and/or runs too long then replacing the control board could solve your appliance problem. The tools needed for this installation project is a small flat blade screwdriver. *Please note: the board will need to be programmed after installation. Remember to unplug refrigerator from power source as a safety precaution. Refer to the manual provided by the manufacturer for further installation instructions and accurate guidance.
-
Glass NOT included. If you are looking for the center rail see related parts below. This is used for the crisper drawer in the refrigerators
-
(8)
This part allows the cold air from the freezer section to be aired into the fresh food section and it is controlled by the thermostat.
-
(2)
The water inlet valve is a solenoid-operated switch that, when activated, releases water from the supply line to the water valve and into the compact icemaker mold. This valve is used on side by side or bottom mount refrigerators.
-
This fan motor is most times used with frost-free refrigerators with a condenser coil. When the compressor runs, so does this fan, circulating air through the refrigerator grille, cooling the compressor and condenser coils. This fan motor also helps to evaporate excess water in the drain pan.