Most Popular Parts
These are the most commonly purchased repair parts for GSD5911G00CC.
-
(11)
This baffle fits the lower left-hand corner of the dishwasher, is black in color, made of plastic and has a matching right-hand lower corner baffle that is sold separately. The baffle is used to prevent water from leaking from the tub through the door. If your baffle is damaged, worn, or missing, it will cause the dishwasher to leak and the baffles will need to be replaced. It is recommended that you replace and install both the left and right baffle at the same time. This is a genuine OEM part.
-
(2)
This baffle fits the lower right-hand corner of the dishwasher, is black in color, made of plastic, and has a matching left-hand lower corner baffle that is sold separately. The baffle is used to prevent water from leaking from the tub through the door. If your baffle is damaged, worn, or missing, it will cause the dishwasher to leak and the baffles will need to be replaced. It is recommended that you replace both left and right baffles at the same time. This is a genuine OEM part.
-
(36)
The lower rack wheel kit includes 8 wheels and 8 axels for your rack. If your dishrack is not moving in and out of the dishwasher properly you may have a broken or missing wheel and it will need to be replaced. The wheel and axle are white in color and made of plastic. This is a genuine OEM part kit.
-
(1)
The grate shaft seal, also known as drain valve shaft seal, is a seal for your dishwasher drain pump valve. The seal forms a watertight seal around the flapper valve shaft to avoid water from leaking on to the floor. The seal is black in color and measures .25” in diameter. When doing the repair, you may need to cut off the push-on nut, if so a new one will need to be ordered. Please remember to shut off the water supply and disconnect the power to the dishwasher before starting the repair. This is a genuine OEM part.
-
(6)
This push on nut is for your dishwasher or refrigerator. As the name suggests, it pushes into place, rather than being screwed in. It is approximately half an inch in diameter and is made of stainless steel.
-
(3)
The hinge link on your dishwasher connects the spring to the dishwasher door hinge. If the hinge link becomes cracked or damaged, you may not be able to shut or lock your dishwasher door properly. In this case, you will need to replace the hinge link. Pull out your dishwasher to inspect the hinge and spring, if the link is broken, it may be disconnected and on the ground already. If not, you can remove the hinge arm link by simply disconnecting it from the hinge and spring, then replacing it with the new part. The hinge arm link is a small piece of white plastic about an inch and a half long. It is sold individually, and is an OEM part from the manufacturer.