10654606300 Kenmore Refrigerator Parts List

Search the entire 10654606300 by part description. Keep descriptions simple, e.g. "belt" or "pump". Need help?

Icemaker motor kit (module assembly (includes items 37 & 38))

This kit includes the module motor, ejector arm, and ice stripper arm. The complete icemaker is sold separately.

Easy Part #:: EAP733947

Availability:: In Stock

Price:: $133.37

Ice dispenser door chute (door, ice)

*Please note, this door chute is no longer being manufactured with a heater.

Easy Part #:: EAP11739035

Availability:: In Stock

Price:: $18.31

Cycling thermostat (thermostat (also order 542639 cement alumilastic))

The ice maker thermostat, also known as bi-metal device, regulates and controls the activation of the icemaker ejection cycle. The thermostat lets the ice maker know when it is cold enough to produce ice. If your ice maker is not making ice or not dispensing ice, you may need to replace the thermostat. This is a genuine OEM part and comes with two retaining clips. Please remember to disconnect power to your refrigerator before starting your repair.

Easy Part #:: EAP11743313

Availability:: In Stock

Price:: $71.32

Levers retainer/clip (retainer, levers)

This part is the replacement dispenser lever retainer for your refrigerator. It is made of metal and is approximately 2 inches long and ½ an inch wide. The bottom half of the dispenser lever retainer holds in the pivot points of the ice and water arms. If it breaks, the arms will be loose and can shake around. The top half springs the ice and water arms back into the original position, and if the retainer is broken, they will not be able to do this. The dispenser lever retainer is found behind the dispenser trim and can be removed with a ¼ inch nut driver. This part is sold individually and is an OEM part.

Easy Part #:: EAP11739183

Availability:: In Stock

Price:: $11.27

Compressor start relay (start-device, combination (start relay and overload) for production compressor only)

NOTE: This part has been replaced by the manufacturer. It may look different from the original but will still function the same. This part is both the start relay and the overload. The start relay boosts the compressor, and then shuts off as soon as the motor gets up to speed and the overload provides extra protection against excessive temperatures.

Easy Part #:: EAP11740412

Availability:: In Stock

Price:: $115.80

Door light switch (switch, light)

The white door light switch is in the control panel section of your refrigerator. The light will turn on when you open the door. If the light doesn?t turn on when the door is open the contacts in the switch could be burnt out and will need to be replaced. This is a genuine OEM part. Please remember to disconnect the power to your refrigerator before starting your repair.

Easy Part #:: EAP11738900

Availability:: In Stock

Price:: $34.85

Top hinge - right side (hinge top (rc))

This part is the top hinge for your refrigerator door. It is made of metal and is approximately 5 inches by 3 ¼ inches in size. This hinge is for the right side of the refrigerator door only. The left side hinge is sold separately. The top hinge allows your refrigerator door to open and close properly. If your door is hanging strangely, or if the door won’t open or close properly, you may need to replace the top hinge. This part is sold individually and is an authentic OEM part.

Easy Part #:: EAP11739597

Availability:: In Stock

Price:: $64.17

Condenser motor kit (motor, fan)

This kit includes the motor, blade and bracket. This fan motor circulates the air through the refrigerator grille and cools the compressor and condenser coils. It also helps to evaporate extra water in the drain pan.

Easy Part #:: EAP2329961

Availability:: In Stock

Price:: $255.96

Light socket kit (socket)

The bulb is sold separately.

Easy Part #:: EAP371236

Availability:: In Stock

Price:: $81.23

Ice auger motor shaft (drive shaft)

This part is the drive shaft for the auger.

Easy Part #:: EAP11739142

Availability:: In Stock

Price:: $75.01

Water dispenser reservoir tubing (reservoir)

This kit no longer includes the connectors. It is only the tubing/water reservoir. Note: This tubing requires an adapter coupler (PS369735) to take the tubing from 1/4 inch to 5/16 inch.

Easy Part #:: EAP11739924

Availability:: Special Order

Price:: $114.84

Flipper

This part is a replacement flipper or emitter cover for your refrigerator. It is made of white plastic and is approximately 3 inches by 2 inches. The flipper shields the emitter control board and houses the flipper cover for the emitter board. If your flipper is broken or missing, your ice maker may not make or dispense ice, and will need to be replaced. This part is sold individually and is an authentic OEM part sourced directly from the manufacturer.

Easy Part #:: EAP11739242

Availability:: In Stock

Price:: $45.03

Water dispenser fitting and tube assembly (water fitting assembly (includes water tube))

Anti drip valve NOT included.

Easy Part #:: EAP886371

Availability:: In Stock

Price:: $83.86

Screw

Sold individually.

Easy Part #:: EAP11742754

Availability:: In Stock

Price:: $6.22

Ice mold (mold & heater assembly (also order 542638 silicone grease))

This ice cube mold and heater assembly has a flake resistant surface with separations that mold eight ice crescents and is used with modular style icemakers on some refrigerators. The mold heater is an electrical device that thaws the ice quickly, so it can be released from the icemaker mold. If your ice maker isn’t making ice you may need to replace this part. Please remember to disconnect the power and water supply before starting your repair.