66516352300 Kenmore Dishwasher Parts List

Search the entire 66516352300 by part description. Keep descriptions simple, e.g. "belt" or "pump". Need help?

3rd level wash spinner kit (spinner, 3rd level wash)

This part is the top spinner located at the very top of the wash tub. Water passes through all the spinners causing it to dispense all around the tub.

Easy Part #:: EAP734590

Availability:: In Stock - Ships Today

Price:: $17.30

Sump pump check valve (check valve, sump)

May differ in appearance, but functions same as original. This valve allows the water to flow in the drain direction only and prevents the dirty water from coming back into the tub.

Easy Part #:: EAP11745441

Availability:: In Stock - Ships Today

Price:: $60.73

Accumulator and filter (accumulator assy)

This part is essential in your dishes getting clean during the wash cycle. If there is any debris or a tear in the filter, it can cause extra buildup and, therefore, causing dirty dishes.

Easy Part #:: EAP897295

Availability:: In Stock - Ships Today

Price:: $144.83

Circulation pump and motor assembly (sump & motor assembly)

*** This part no longer includes the Chopper Assembly as per the Manufacturer *** The part functions by spinning the impeller of the circulation pump, which is used to move the water through the spray arms during the wash cycle.

Easy Part #:: EAP11699805

Availability:: In Stock - Ships Today

Price:: $238.42

Rubber washer (washer, heater element)

The black heating element washer goes between the heating element and the dishwasher tub to form a seal where the element attaches to prevent water from leaking during its cycle. If the washer goes bad it will cause water to leak out on to the floor. This part is made of rubber, measures approximately 1” in diameter and is sold individually. This is a genuine OEM part.

Easy Part #:: EAP11743934

Availability:: In Stock - Ships Today

Price:: $8.91

Spray arm seal (seal, sprayarm)

This seal is located between the spray arm and the water feed tube.

Easy Part #:: EAP11745444

Availability:: In Stock - Ships Today

Price:: $15.74

Drain hose (hose, drain)

This drain hose is 6 and 1/2 feet.

Easy Part #:: EAP2358130

Availability:: In Stock - Ships Today

Price:: $36.29

Spring (spring, door balance)

This door spring is a genuine OEM replacement part for your dishwasher. The spring ensures that your dishwasher door does not fall open too quickly. If this occurs, one or both springs should be replaced. This part consists of one spring. To replace the spring, you will need to pull the dishwasher about six inches to a foot out from the cabinet. Replacing the spring has been rated as an easy repair by our customers.

Easy Part #:: EAP11753142

Availability:: In Stock - Ships Today

Price:: $35.65

High limit thermostat (thermostat)

This part acts as as safety mechanism that keeps the dryer from overheating. Once the dryer temperature reaches a certain point, this part will shut down power to the heating element.

Easy Part #:: EAP11743423

Availability:: In Stock - Ships Today

Price:: $25.95

Drain hose (drain loop with check valve)

This hose is used to drain the water.

Easy Part #:: EAP11753695

Availability:: In Stock - Ships Today

Price:: $76.31

Inlet fill hose (hose, inlet)

This fill hose is a genuine OEM replacement part for your dishwasher. The hose is made of black plastic, and is accordion-style, for ease of movement within your dishwasher. To replace the fill hose, you will need a 1/4 inch nut driver, Channellock pliers, and a Phillips screwdriver. Replacing this part will require some disassembly, such as removing the water inlet valve from the fill hose, and the clamps which secure the hose in place. Reuse your existing clamps when securing your new fill hose in place.

Easy Part #:: EAP11738178

Availability:: In Stock - Ships Today

Price:: $88.76

Water inlet (water inlet assembly (also order item 4))

This is connected to the water valve, is located on the side of your tub and allows water to enter your dishwasher. ***Note: This part does not include the inlet gasket - must order separately.

Easy Part #:: EAP11750066

Availability:: In Stock - Ships Today

Price:: $91.76

Hose clamp (clamp, hose)

This hose clamp expands from half an inch to an inch in diameter. It is made entirely of metal and is intended for use with Maytag washing machines to secure the end of the drain hose to the pump drain port. Please make sure to disconnect the power to your washer before you start your repair. This hose clamp is a genuine OEM part and is sold individually.