10658782890 Kenmore Refrigerator Parts List

Search the entire 10658782890 by part description. Keep descriptions simple, e.g. "belt" or "pump". Need help?

Refrigerator crisper drawer with humidity control (crisper pan)

This clear crisper drawer with humidity control allows you to adjust the humidity within the crisper. This can extend the life of your produce. Does the drawer measure approximately 7.60 inches in height by 14.92 inches from front to back and 16.50 inches wide. This is a genuine OEM part.

Easy Part #:: EAP11739119

Availability:: In Stock

Price:: $96.88

Light bulb - 40w (light bulb)

This 40-watt light bulb has a standard screw-in base. It is used in many different appliances. If your current bulb is burnt out or broken you will need to replace it. This light bulb is a genuine OEM part and is sold individually.

Easy Part #:: EAP884734

Availability:: In Stock

Price:: $13.48

Door cam - black (door closer,lower cam (2))

The refrigerator uses a set of cams to help with the closing of the doors and help to keep them in position. These cams are mounted around the door pivot point and are made up of a series of ridges and valleys to help keep the door in position. If your refrigerator uses a door closer, the door should shut all by itself. This part is black in color, made of plastic, and is sold individually. This is a genuine OEM part. Note: As per the manufacturer a new screw is needed to mount the door cam. This door cam is sold individually.

Easy Part #:: EAP11752991

Availability:: In Stock

Price:: $11.97

Refrigerator crisper drawer with handle (meat pan)

This clear convertible meat drawer can be used to store meats or vegetables. It has its own cold air duct to allow cold air from the freezer to flow into the drawer. You could have a broken or faulty drawer if you find that the food being kept within is spoiling or drying out quickly. The drawer should slide open and closed with ease. If your drawer will not easily slide open or closed, check the tracks that the drawer slides on. If the tracks are not damaged, the drawer itself could be at fault and should be replaced. This part measures approximately 16 7/16 inches wide x 14 5/16 inches deep x 7 5/8 inches high, and is a genuine OEM replacement part. It is sold individually.

Easy Part #:: EAP11739122

Availability:: In Stock

Price:: $77.17

Water inlet valve (valve, solenoid)

This genuine replacement water inlet valve with tubing supplies water to the ice maker and water dispenser. The valve is 120 volts and 50/60 Hz. If your ice maker is not making ice or no water is coming from the dispenser, you may need to replace this part. The manufacturer has updated the water inlet valve and it no longer includes the removable pre-filter bracket. If you are unable to reuse the old removable pre-filter bracket, order part number WPW10445062. Please remember to disconnect the water and power supply before starting your repair.

Easy Part #:: EAP3497634

Availability:: In Stock

Price:: $126.74

Housing, water filter

The filter is NOT included with this part. This part has a 1/4" and a 5/16" push on fittings - that way, you can push in the water lines for easy installation.

Easy Part #:: EAP11739083

Availability:: In Stock

Price:: $98.48

Bi-metal defrost thermostat (bi-metal, defrost)

If ice is building up in your freezer or if your freezer is getting too warm on the defrost cycle you may need to replace the bi-metal thermostat.

Easy Part #:: EAP11750673

Availability:: In Stock

Price:: $53.52

Light bulb - 10w (bulb, light)

This ten watt appliance light bulb is two inches tall. It is used with both washers and dryers.

Easy Part #:: EAP11739347

Availability:: In Stock

Price:: $18.75

Replacement ice maker (complete icemaker assembly)

This 8-cube ice maker is used to help produce ice for your refrigerator. The ice maker receives water from the water inlet valve and will freeze the water until ice cubes are formed. Once the water has been frozen the ice cubes will be ejected from the mold into the ice bucket and will refill with water to repeat the process until the ice bucket is full. This ice maker does not include the bail or shut off arm. You can reuse the arms for your old ice maker or you can also order them separately if required. It does come complete with flat and round plug wiring harness, the mounting hardware, and the instructions. The harness can be reused. This ice maker will not fit refrigerators that have the ice auger mounted on the door. If your ice maker is not making ice you may need to replace this part. Please remember to disconnect the power and water supply before starting your repair. This ice maker is a genuine OEM part.

Easy Part #:: EAP358591

Availability:: In Stock

Price:: $168.93

Everydrop water filter (water filter)

This genuine Whirlpool water filter is used in your refrigerator to help reduce contaminants that may be in your household water supply. The water filter measures 2 1/2” in diameter and 10 1/2” long and is in the filter housing inside of your refrigerator. It is recommended to replace the water filter every 6 months for best performance. This water filter will fit all Whirlpool and KitchenAid refrigerators with a water filter located in the base grill below the door. Also, for Kenmore models starting with 106. Filters for taste and odor, sediment, chlorine, lead.

Easy Part #:: EAP11722132

Availability:: Special Order

Price:: $97.89

Control bracket (bracket, control)

This bracket holds the micro switches and the light in the freezer dispenser section.

Easy Part #:: EAP11739027

Availability:: In Stock

Price:: $22.30

Screw

This screw is half an inch long. It is made of metal and is intended for use with ranges, refrigerators, and washing machines.

Easy Part #:: EAP12349731

Availability:: In Stock

Price:: $23.88

Thermostat assembly

The thermostat will sense the temperature increase in the evaporator during the defrost cycle and will cycle the defrost heater off after the ice or frost is melted.

Easy Part #:: EAP11739232

Availability:: In Stock

Price:: $111.33

Icemaker control assembly (module assembly (includes items 37 and 38))

This part is used to help tell the icemaker what to do - it turns the timing cams and the ejector blades. It also controls the heater, the water inlet valve, the cube size, and cube ejection. The control assembly is located under the white cover of the ice maker. If the ice maker is making too much ice or not making ice at all, you may need to replace the control assembly. The motor is not sold separately. This is a genuine OEM part. Please make sure you disconnect power to the refrigerator before starting your repair.