1067687760 Kenmore Refrigerator Parts List

Search the entire 1067687760 by part description. Keep descriptions simple, e.g. "belt" or "pump". Need help?

Light bulb - 40w (bulb)

This 40-watt light bulb has a standard screw-in base. It is used in many different appliances. If your current bulb is burnt out or broken you will need to replace it. This light bulb is a genuine OEM part and is sold individually.

Easy Part #:: EAP884734

Availability:: In Stock

Price:: $13.48

Refrigerator door switch (switch (light))

Door switch turns the light off when you close the door.

Easy Part #:: EAP12728638

Availability:: In Stock

Price:: $44.20

Defrost timer (timer, defrost)

This 120 volt, 60Hz defrost timer acts like a clock, continually advances and alternates between activating the cooling cycle and the defrost heater. If the refrigerator is too warm, freezer section too warm or freezer not defrosting you might need to replace the defrost timer. This is a genuine OEM part. Disconnect the power to the refrigerator before starting the repair.

Easy Part #:: EAP11723171

Availability:: In Stock

Price:: $39.75

Condenser fan motor kit (motor (includes illus. 9, 11, 14))

This condenser fan motor is used with frost-free refrigerators with a condenser coil. When the compressor runs, so does this fan, circulating air through the refrigerator grille, cooling the compressor and condenser coils. This part also helps to evaporate excess water in the drain pan. If your refrigerator/freezer section is too warm you may need to replace this part. This is a genuine OEM part. Please remember to disconnect the power to your refrigerator before starting the repair.

Easy Part #:: EAP395284

Availability:: In Stock

Price:: $78.15

Evaporator fan motor kit (motor, fan)

The evaporator fan motor is in the back of the freezer section and circulates air over the refrigerator coils. These coils will convert the heat into cool air, which is then circulated from the freezer section to the fresh food section. It is suggested to replace the thermistor when replacing the evaporator fan. This kit comes with two mounting grommets, two sleeves (not to be used on porcelain models), two #8 mounting screws, and a push-on fan blade. This is a genuine OEM part. Please remember to disconnect the power to the refrigerator before starting your repair.

Easy Part #:: EAP376645

Availability:: In Stock

Price:: $85.13

Ice maker water fill tube kit (fitting, water tube)

The ice maker fill tube is used to supply water to the ice maker during the fill cycle and is located in the back wall of your refrigerator/freezer. The fill tube is 10” long and includes a compression nut and a tube insert. If the fill tube is cracked or leaking water you will need to replace it. This part is white in color, made of plastic, and is a genuine OEM part. Please remember to disconnect the power and shut off the water supply before starting your repair.

Easy Part #:: EAP11739222

Availability:: In Stock

Price:: $11.65

Screw

Metallic screw that is less than an inch long. Does not include the plastic washer.

Easy Part #:: EAP11742721

Availability:: In Stock

Price:: $9.09

Light socket kit (socket)

The bulb is sold separately.

Easy Part #:: EAP371236

Availability:: In Stock

Price:: $81.23

Hinge sleeve hole plug - white (106.7687710)

Sold individually.

Easy Part #:: EAP11739707

Availability:: In Stock

Price:: $11.22

Hinge washer (washer)

This part can be used on either side of the center door hinges for some refrigerators.

Easy Part #:: EAP11742714

Availability:: In Stock

Price:: $8.72

Hinge washer (washer)

The hinge washer works in conjunction with the door hinge on the refrigerator door. This part is white in color and measures approximately 0.75” in diameter. If the refrigerator door is making noise opening and closing, you may need to replace this part. This is a genuine OEM part and is sold individually.

Easy Part #:: EAP11742707

Availability:: In Stock

Price:: $9.13

Silicone rubber adhesive - 2 oz (cement, insulation (1 oz.))

This 2oz high temperature silicone rubber adhesive is used to create a water tight seal for gaskets and felt seals. The working surface must be clean, dry and free from any type of oil or grease. This is a genuine OEM part. It is recommended to wear gloves to protect your hands while working with the adhesive.