1069500520 Kenmore Refrigerator Parts List

Search the entire 1069500520 by part description. Keep descriptions simple, e.g. "belt" or "pump". Need help?

Door cam - black (door closer, lower cam)

The refrigerator uses a set of cams to help with the closing of the doors and help to keep them in position. These cams are mounted around the door pivot point and are made up of a series of ridges and valleys to help keep the door in position. If your refrigerator uses a door closer, the door should shut all by itself. This part is black in color, made of plastic, and is sold individually. This is a genuine OEM part. Note: As per the manufacturer a new screw is needed to mount the door cam. This door cam is sold individually.

Easy Part #:: EAP11752991

Availability:: In Stock

Price:: $11.97

Bi-metal defrost thermostat (bi-metal, defrost)

If ice is building up in your freezer or if your freezer is getting too warm on the defrost cycle you may need to replace the bi-metal thermostat.

Easy Part #:: EAP11750673

Availability:: In Stock

Price:: $53.52

Door closing cam kit (door closer, upper cam)

This door closing cam kit is intended for use with the bottom of refrigerator and freezer door hinges. The cam helps with the closing of the doors and to keep them slightly in position when opened.

Easy Part #:: EAP358690

Availability:: In Stock

Price:: $17.00

Crisper cover with glass (cover, crisper)

This part is also known as a shelf frame. This drawer cover is for refrigerators. Drawer cover has rail brackets under the cover that hold the drawer and allow the drawer to slide in and out on the rails. Follow the instructions in the owner's manual or installation guide when installing this part. This comes with glass.

Easy Part #:: EAP4082908

Availability:: In Stock

Price:: $158.76

Nozzle and tube kit (water fitting assembly)

This kit is intended for use with refrigerators that have a water dispenser in the door.

Easy Part #:: EAP11742481

Availability:: In Stock

Price:: $126.76

Evaporator fan blade (fan blade)

If your refrigerator or freezer is too warm, or making noises, you may need to replace the fan blade. The fan blade attaches to the evaporator motor, which is in the freezer section, to help circulate the cold air into the refrigerator and freezer sections. The fan blade is white in color and made from plastic. This is a genuine OEM part. Please be sure to disconnect the power to your refrigerator before starting your repair.

Easy Part #:: EAP11738973

Availability:: In Stock

Price:: $42.73

Screw

This screw is sold individually.

Easy Part #:: EAP11742755

Availability:: In Stock

Price:: $15.03

Evaporator drip tray (tray, evaporator)

This is the replacement evaporator drip tray for your refrigerator. It is made of white plastic and is approximately 19 inches by 9 inches. The evaporator drip tray sits below the evaporator to collect dripping water. If the drip tray is damaged, you may notice that your refrigerator is leaking. Because it is made of plastic, the drip tray can eventually develop a crack. You will need to pull out the refrigerator from the wall, and take off the bottom panel on the back of your refrigerator in order to access the drip tray for replacement. This is an OEM part sourced directly from the manufacturer.

Easy Part #:: EAP11756735

Availability:: In Stock

Price:: $88.48

Screw

This screw is half an inch long. It is made of metal and is intended for use with ranges, refrigerators, and washing machines.

Easy Part #:: EAP12349731

Availability:: In Stock

Price:: $23.88

Refrigerator shelf glass (glass, crisper cover)

This is the glass panel only. The frame is sold separately.

Easy Part #:: EAP11731733

Availability:: In Stock

Price:: $144.05

Ice maker water fill tube kit (fitting, water tube)

The ice maker fill tube is used to supply water to the ice maker during the fill cycle and is located in the back wall of your refrigerator/freezer. The fill tube is 10” long and includes a compression nut and a tube insert. If the fill tube is cracked or leaking water you will need to replace it. This part is white in color, made of plastic, and is a genuine OEM part. Please remember to disconnect the power and shut off the water supply before starting your repair.

Easy Part #:: EAP11739222

Availability:: In Stock

Price:: $11.65

Micro switch (switch)

This switch is located inside the dispenser.

Easy Part #:: EAP11738948

Availability:: In Stock

Price:: $26.44

Screw

Metallic screw that is less than an inch long. Does not include the plastic washer.

Easy Part #:: EAP11742721

Availability:: In Stock

Price:: $9.09

Water fill cup and bearing (cup-water fill)

The ice maker fill cup and bearing dispenses the water into the ice mold during the fill cycle. If your ice maker isn’t making ice, is leaking, or the cup or bearing is cracked, you will need to replace this part. This part is three inches long, white in color, and is made of plastic. It is a genuine OEM part. Please remember to disconnect the power and water supply to your refrigerator before starting the repair.

Easy Part #:: EAP11743318

Availability:: In Stock

Price:: $46.41

Cycling thermostat (thermostat (also order 542369 cement alumilastic))

The ice maker thermostat, also known as bi-metal device, regulates and controls the activation of the icemaker ejection cycle. The thermostat lets the ice maker know when it is cold enough to produce ice. If your ice maker is not making ice or not dispensing ice, you may need to replace the thermostat. This is a genuine OEM part and comes with two retaining clips. Please remember to disconnect power to your refrigerator before starting your repair.