66513263K110 Kenmore Dishwasher Parts List

Search the entire 66513263K110 by part description. Keep descriptions simple, e.g. "belt" or "pump". Need help?

Lower dishrack wheel (wheel)

The lower rack wheel assembly attaches to the rack to allow you to slide the rack in and out easily. The wheel is gray in color, made of plastic, and approximately 6 inches long. This rack wheel assembly is a genuine OEM part and is sold individually.

Easy Part #:: EAP3406971

Availability:: On Order

Price:: $52.89

Dishwasher dish rack adjuster kit - left and right side (adjuster)

The rack adjuster connects to the dishrack and is used to change the height of the rack. This kit includes the parts to replace the left and right-side rack adjusters and has been upgraded to a more durable metal design. This kit includes 2 adjuster assemblies, 1 left-hand and 1 right-hand actuator cover, 2 gray adjuster covers, and 2 gray adjuster housings. The most common symptoms linked with faulty rack adjusters include: leaking, door latch failure, door not closing, dishes not cleaning properly, and failure to start the washing cycle. It is recommended to replace both the right and left side adjusters at the same time.This is a genuine OEM part.

Easy Part #:: EAP10064063

Availability:: In Stock - Ships Today

Price:: $55.12

Dishwasher door seal (gasket)

Door seal seals the gap between the opening to the dishwasher tub and the outer edge of the door.

Easy Part #:: EAP12348515

Availability:: In Stock - Ships Today

Price:: $77.57

Dishwasher drain pump (drain pump)

Easy Part #:: EAP11753379

Availability:: In Stock - Ships Today

Price:: $105.63

Mounting bracket

The mounting bracket is used to attach the dishwasher to the underside of the counter. The mounting bracket holds the dishwasher in place to keep it from moving during cycles and to keep the dishwasher level. The bracket is made of metal and is approximately 3” in length. The screws are not included with the bracket, they must be ordered separately. This is a genuine OEM part. Please remember to disconnect the power and the water supply to the dishwasher before starting the repair.

Easy Part #:: EAP11745496

Availability:: In Stock - Ships Today

Price:: $11.53

Dishwasher heating element (heater)

The heating element is not designed to heat the water that enters it, but is designed to maintain the heat of the water that enters the dishwasher. It is located on the bottom of the dishwasher.

Easy Part #:: EAP9494999

Availability:: In Stock - Ships Today

Price:: $100.73

Rack stop clip (stop)

This rack stop clip works for either the right or left side of your upper dish rack. This part is sold individually.

Easy Part #:: EAP11750071

Availability:: In Stock - Ships Today

Price:: $9.31

Dishwasher positioner (positioner)

Also known as rack adjuster. Sold individually. This is an original part from KitchenAid, Kenmore, Whirlpool, Jenn-Air, and Maytag for use with Dishwashers. The dishrack adjuster arm positioner clip holds the adjuster arm in the right position on the dishrack. The most common reason for replacing the strap is if the rack will not stay in its desired position. This part is sold individually. There are no tools needed to replace the positioner.

Easy Part #:: EAP11750093

Availability:: In Stock - Ships Today

Price:: $43.93

Dishwasher inlet valve (inlet valve)

This water inlet valve should be located behind the lower kick plate panel in either the right or left corner. The attaching solenoids on the valve open and close according to the desired amount of water needed.

Easy Part #:: EAP12578165

Availability:: In Stock - Ships Today

Price:: $73.53

Motor

Also know as a diverter valve. This diverter motor is for dishwashers. Diverter motor controls the flow of water to the spray arms. Unplug the dishwasher and shut off the water supply before installing this part. Wear work gloves to protect your hands.

Easy Part #:: EAP5136127

Availability:: In Stock - Ships Today

Price:: $125.68

Tine row

The tine row is located on the lower dishrack. The tine row can be raised or lowered to provide more room in the lower dishrack. Over time the tine row can become rusted, damaged, or lost, and will need to be replaced. The manufacturer has updated the tine row, it may look different but it will still fit like the original. This part measures approximately 19 1/2” long and is made of metal. This is a genuine OEM part and is sold individually.

Easy Part #:: EAP10057161

Availability:: In Stock - Ships Today

Price:: $77.24

Dishwasher dishrack adjuster (adjuster)

Sold individually. This dishrack adjuster is for dishwashers. Dishrack adjuster lets you change the height of the dishwasher's upper rack. Wear work gloves to protect your hands when installing this part.

Easy Part #:: EAP11750092

Availability:: In Stock - Ships Today

Price:: $52.93

Seal

This part is the replacement door seal for your dishwasher. It is approximately 22 inches long and 2 inches wide. This door seal is made of gray plastic and is found at the bottom the dishwasher. The door seal is designed to seal the gap between the dishwasher tub and outer edge of the door. This helps to prevent leaks when your dishwasher is running. A leaking dishwasher is a good indication that the door seal is damaged. This seal is sold individually and is an OEM part sourced directly from the manufacturer.

Easy Part #:: EAP11755651

Availability:: In Stock - Ships Today

Price:: $12.79

Sump

This works in conjunction with the pump and filtration system. It is used to receive drainage for disposal.

Easy Part #:: EAP11755006

Availability:: In Stock - Ships Today

Price:: $143.42

Middle spray arm (sprayarm)

This is a replacement middle spray arm in your dishwasher. You will find your middle spray arm mounted on the bottom of the middle dish rack. The upper spray arm rotates and sprays water during the operating cycle. If your dishes are not coming out of the dishwasher clean, you may have a malfunctioning middle spray arm. Debris and hard water buildup in your dishwasher can cause the middle spray arm to clog. To replace the spray arm, simply turn the arm counter clockwise to release it from the dish rack. Screw in the new spray arm to complete the repair. This part is sold individually.