79640021900 Kenmore Washer Parts List

Search the entire 79640021900 by part description. Keep descriptions simple, e.g. "belt" or "pump". Need help?

Washing machine drain pump (pump motor assembly)

This drain pump motor helps expel water from the washing machine and is activated after the spin speed is maintained for a specific period. If your washer will not drain, is noisy, leaking, or pumps but will not spin, you may need to replace the drain pump motor. This is a genuine OEM part. Please remember to shut off the water supply and disconnect the power to the washer before starting your repair. Note: Pump casing is not included.

Easy Part #:: EAP3579318

Availability:: In Stock

Price:: $140.89

Water inlet valve - hot (valve)

The hot water inlet valve is located on the back of the washer and it helps control the amount of water that enters into the washer. The valve has a standard hose fitting inlet, 1 water outlet, 120 volts and 6 watts. If the washer is filling slowly or not at all, the solenoid may have gone bad and you will need to replace the inlet valve. The valve measures approximately 3” L x 2 3/4” W. Please remember to disconnect the water and power to the washer before starting the repair. This is a genuine OEM hot water inlet valve.

Easy Part #:: EAP3527427

Availability:: In Stock

Price:: $68.41

Washer motor rotor position sensor (sensor assembly)

The sensor monitors the direction and speed of the spinning rotor.

Easy Part #:: EAP11706506

Availability:: In Stock

Price:: $36.41

Door lock assembly (switch)

Easy Part #:: EAP3533609

Availability:: In Stock

Price:: $98.38

Shock absorber kit (shock assembly)

This kit includes 1 shock absorber and 2 mounting pins.

Easy Part #:: EAP3522315

Availability:: Special Order

Price:: $58.14

Gasket (seal)

This genuine OEM drum seal gasket prevents water from leaking between the outer tub and spin basket of your washer. It is made of black rubber and measures 2.5 inches in diameter. If your washer is leaking, and running noisier than usual, check for wear on the gasket, and to ensure it is properly fitted.

Easy Part #:: EAP3522854

Availability:: In Stock

Price:: $35.55

Noise filter assembly (filter)

Easy Part #:: EAP3528920

Availability:: In Stock

Price:: $110.72

Spider

The spider, or rear tub support, is located behind the outer tub of your washer, and provides support to the outer tub. It has 3 legs and each measures approximately 10 inches long. If your washer moves or shakes, or sounds noisier than usual during the washing cycle, the support spider may be faulty or broken and should be replaced immediately.

Easy Part #:: EAP12075847

Availability:: In Stock

Price:: $255.23

Pump casing (casing)

This part connects to the drain pump and motor.

Easy Part #:: EAP3518248

Availability:: In Stock

Price:: $39.37

Gasket (seal)

Easy Part #:: EAP3522860

Availability:: In Stock

Price:: $33.35

Detergent dispenser (box)

The blue plastic detergent dispenser holds the detergent and then dispenses it into the washer during the wash cycle. If the detergent dispenser is broken, lost, or if the detergent is not dispensed during the wash cycle, you may need to replace it. The dispenser is approximately 4”wide, 4.5” long, 2” tall and is an genuine OEM part.

Easy Part #:: EAP3522644

Availability:: In Stock

Price:: $32.27

Hose assembly,drain (drain hose)

Easy Part #:: EAP3527325

Availability:: In Stock

Price:: $79.63

Leg assembly (leg assy)

This levelling leg is a genuine replacement part. It is used to help keep your washing machine stable and balanced. It helps support your appliance. It screws into the base of your washer, and you can thread it in or out to adjust the height. The foot on this leg is made of rubber, which helps with grip, stabilization, and vibration reduction. It is also hexagonal in shape, which allows you to more easily adjust it. This levelling leg features a locknut on the shaft which can be tightened against the bottom of your appliance, this will stop the leg from rotating while you are using your washer. This replacement is sold individually.

Easy Part #:: EAP7788210

Availability:: In Stock

Price:: $45.05

Pump filter (bag)

This replacement pump filter, also known as a filter assembly, is a genuine OEM part for your washer or washer/dryer combo. Before beginning this repair, turn off the power and water supply to your washer. The filter assembly may need to be replaced because it is broken or is leaking water. To locate the filter assembly, pry open the small door on the front of the washer, using a flat-blade screwdriver. Unplug the drain hose next to the filter and drain the water into a bucket. Then unscrew the pump filter, and replace with your new one.