40311 Parts List

Search the entire 40311 by part description. Keep descriptions simple, e.g. "belt" or "pump". Need help?

Detergent dispenser with rinse cap (module rinse and cap asm)

This part releases the detergent and rinse aid into the dishwasher.

Easy Part #:: EAP958966

Availability:: Special Order

Price:: $133.34

Water inlet valve - hot

The hot water inlet valve is located on the back of the washer and it helps control the amount of water that enters into the washer. The valve has a standard hose fitting inlet, 1 water outlet, 120 volts and 6 watts. If the washer is filling slowly or not at all, the solenoid may have gone bad and you will need to replace the inlet valve. The valve measures approximately 3” L x 2 3/4” W. Please remember to disconnect the water and power to the washer before starting the repair. This is a genuine OEM hot water inlet valve.

Easy Part #:: EAP3527427

Availability:: In Stock - Ships Today

Price:: $68.41

Washer hose with bellows

This washer hose with bellows, also known as a dispenser hose, is a genuine OEM replacement part for your washer. Replacing this part can be helpful if your washer is leaking. The dispenser hose connects the dispenser assembly to the tub. Before beginning the repair, unplug the washer and turn off the water supply. You will need a Phillips head screwdriver to complete this repair; a clamp tool can also be helpful. Remove the screws holding the lid of the washer in place, and take off the lid. Locate the dispenser hose and remove its clamps. Place the clamps on the new hose, using the arrows for a guide in positioning the clamps. Install the new hose and reassemble all other parts.

Easy Part #:: EAP3523347

Availability:: In Stock - Ships Today

Price:: $55.87

Door handle actuator (actuator handle)

This is a handle actuator for your dishwasher. It is made of black plastic, and is sold individually. The handle actuator is found in the control panel, and it releases the door latch when you lift the handle. If your current handle actuator is cracked or broken, you may not be able to open your dishwasher door, or the door will not close properly. The dishwasher also may not be able to start, and if this is the case, you will need to replace this part.

Easy Part #:: EAP2337860

Availability:: Special Order

Price:: $88.40

Tub gasket (gasket)

This is the tub gasket replacement for your dishwasher. The tub gasket fits around the perimeter of the door and forms a seal that prevents the dishwasher from leaking when it is filled with water. If the tub gasket is loose or damaged, you may notice your dishwasher leaking. The tub gasket can wear over time, or become stretched. In either case it will need to be replaced to prevent a leak. The gasket is made of black rubber and is sold individually.

Easy Part #:: EAP258656

Availability:: Special Order

Price:: $62.43

Short bottom door seal (seal short bottom door)

Screws are sold separately.

Easy Part #:: EAP2337852

Availability:: Special Order

Price:: $62.43

Complete lower service rack assembly (rack lower roll kit)

This dish rack is for dishwashers. Dish rack holds the dishes in place during the dish washing cycle.

Easy Part #:: EAP12749241

Availability:: No Longer Available

Recess door spring (spring recess door)

This door recess spring or dispenser lever spring in your refrigerator is used to return the ice door to the closed position or the dispenser lever to the home position once released. You will find the spring in the water dispenser assembly, behind the main control panel. If the dispenser lever is malfunctioning or the dispenser ice door is not closing, you may need to replace this door recess spring.

Easy Part #:: EAP285013

Availability:: Special Order

Price:: $9.83

Fine filter (filter fine asm)

This filter sits at the bottom of the dishwasher.

Easy Part #:: EAP958919

Availability:: Special Order

Price:: $87.47

Rear tub gasket

The rear tub gasket is located between the drive shaft and the rear outer tub to form a watertight seal to prevent water from leaking. It is recommended to replace the two bearings at the same time as replacing the tub gasket. The gasket is black in color and measures approximately 3” in diameter. This is a genuine OEM part. Please make sure you disconnect the power and water supply to the washer before starting your repair.

Easy Part #:: EAP3522855

Availability:: In Stock - Ships Today

Price:: $41.27

Fine filter hub nut (nut)

This is the replacement fine filter hub nut for your dishwasher. It is made of white plastic and is approximately 3 inches in diameter. The fine filter hub nut is also known as the lower spray arm hub nut, and it connects the lower spray arm to the hub. If the hub nut breaks, it can cause the spray arm to wobble during operation and this can result in a strange noise. To replace this part, first remove the spray arm by turning it counter clockwise, then do the same with the hub nut. Install the new hub nut by turning it counter clockwise, then replace the lower spray arm. This part is sold individually and is an OEM part from the manufacturer.

Easy Part #:: EAP259078

Availability:: Special Order

Price:: $69.75

Rinse aid cap (cap rinse asm)

This part holds the rinse aid liquid in the dispenser until the timer activates the rinse cycle.

Easy Part #:: EAP958932

Availability:: Special Order

Price:: $36.81

Gasket

The outer tub gasket is used to create a seal between the front and rear outer tub to prevent water leaking. The tub gasket is located between the front outer tub and the rear outer tub. If your washer starts leaking from between the outer and rear tub, the tub gasket could be worn out or damaged and will need to be replaced. This part is black in color and made of rubber. This is a genuine OEM part. Please remember to disconnect the power and water supply to the washer before starting the repair.