41172 LG Parts List

Search the entire 41172 by part description. Keep descriptions simple, e.g. "belt" or "pump". Need help?

Bearing,ball (ball bearing)

The tub bearing supports the spin basket shaft at the back of the washing tub. If your washing machine will not spin, is leaking water, or if there is a loud screeching noise during the wash cycle, there could be an issue with the tub bearing. This genuine OEM replacement bearing has a 3-inch outer diameter, and is used to help the tub spin smoothly and to stop the washing machine from shaking during the cycle. NOTE: This part is very difficult to install. The manufacturer recommends replacing the complete rear tub and bearing assembly at the same time.

Easy Part #:: EAP7785069

Availability:: On Order

Price:: $73.18

Detergent dispenser (box assembly, liquid detergent)

The blue plastic detergent dispenser holds the detergent and then dispenses it into the washer during the wash cycle. If the detergent dispenser is broken, lost, or if the detergent is not dispensed during the wash cycle, you may need to replace it. The dispenser is approximately 4”wide, 4.5” long, 2” tall and is an genuine OEM part.

Easy Part #:: EAP3522644

Availability:: In Stock

Price:: $32.27

Thermistor,ntc (thermistor temperature sensor. Works in conjunction with the main control board to monitor the water temperature.)

Easy Part #:: EAP3528953

Availability:: In Stock

Price:: $33.88

Leg assembly (washer leveling leg)

This levelling leg is a genuine replacement part. It is used to help keep your washing machine stable and balanced. It helps support your appliance. It screws into the base of your washer, and you can thread it in or out to adjust the height. The foot on this leg is made of rubber, which helps with grip, stabilization, and vibration reduction. It is also hexagonal in shape, which allows you to more easily adjust it. This levelling leg features a locknut on the shaft which can be tightened against the bottom of your appliance, this will stop the leg from rotating while you are using your washer. This replacement is sold individually.

Easy Part #:: EAP7788210

Availability:: In Stock

Price:: $45.05

Pump filter (washing machine filter and trap assembly.)

This replacement pump filter, also known as a filter assembly, is a genuine OEM part for your washer or washer/dryer combo. Before beginning this repair, turn off the power and water supply to your washer. The filter assembly may need to be replaced because it is broken or is leaking water. To locate the filter assembly, pry open the small door on the front of the washer, using a flat-blade screwdriver. Unplug the drain hose next to the filter and drain the water into a bucket. Then unscrew the pump filter, and replace with your new one.

Easy Part #:: EAP3522306

Availability:: In Stock

Price:: $30.74

Dispenser assembly (dispenser drawer housing)

Easy Part #:: EAP3524182

Availability:: In Stock

Price:: $83.16

Cap,drain hose (washer drain pump filter drain hose plug)

This drain hose plug, also known as a hose cap, is a genuine OEM part for your washing machine. This plug caps the drain hose from the pump housing, and helps prevent leaks from your washer. Before beginning this repair, make sure the power and water sources to your washer are shut off. To access the pump housing, open the pump filter cover, pull out the drain hose, remove the old plug and replace it, first draining the remaining water from the drain hose.

Easy Part #:: EAP3635866

Availability:: In Stock

Price:: $9.23

Drain hose (pump hose)

Easy Part #:: EAP3527285

Availability:: In Stock

Price:: $52.79

Rotor assembly (washing machine rotor assembly. The rotor interacts with the stator to create a strong electromagnetic field which rotates the tub in either direction)

Easy Part #:: EAP3618454

Availability:: In Stock

Price:: $205.75

Inlet valve assembly

This valve is used for cold water, bleach dispenser and prewash cycles. It has a standard hose fitting inlet with 2 outlets facing 45 degrees to the right and one outlet facing 45 degrees to the left.

Easy Part #:: EAP3527452

Availability:: In Stock

Price:: $124.27

Bracket,hinge (hinge bracket)

Easy Part #:: EAP3523787

Availability:: In Stock

Price:: $10.10

Hose,connector (connector hose)

This part is the replacement connector hose or clean-out drain hose for your washer. It is black in color and is sold individually. The connector hose drains water out of the washer if the drain cycle is not working. If the hose breaks, it will not be able to drain the water properly, and you may experience a water leak. Be sure to disconnect your washer from the power source, as well as the water source before you begin this repair. This is an OEM part sourced directly from the manufacturer.