41729 Parts List

Search the entire 41729 by part description. Keep descriptions simple, e.g. "belt" or "pump". Need help?

Bearing,ball

The tub bearing supports the spin basket shaft at the back of the washing tub. If your washing machine will not spin, is leaking water, or if there is a loud screeching noise during the wash cycle, there could be an issue with the tub bearing. This genuine OEM replacement bearing has a 3-inch outer diameter, and is used to help the tub spin smoothly and to stop the washing machine from shaking during the cycle. NOTE: This part is very difficult to install. The manufacturer recommends replacing the complete rear tub and bearing assembly at the same time.

Easy Part #:: EAP7785069

Availability:: On Order

Price:: $73.18

Rear outer tub assembly (rear half of outer tub)

The seal and bearing are included and are not sold separately.

Easy Part #:: EAP418071

Availability:: In Stock

Price:: $647.07

Leveling leg (bushing foot)

Sold individually.

Easy Part #:: EAP418835

Availability:: In Stock

Price:: $39.50

Soap dispenser with valve (dispenser)

This part distributes detergent, bleach and fabric softener at the appropriate times.

Easy Part #:: EAP815456

Availability:: No Longer Available

Detergent dispenser (box assembly, liquid detergent)

The blue plastic detergent dispenser holds the detergent and then dispenses it into the washer during the wash cycle. If the detergent dispenser is broken, lost, or if the detergent is not dispensed during the wash cycle, you may need to replace it. The dispenser is approximately 4”wide, 4.5” long, 2” tall and is an genuine OEM part.

Easy Part #:: EAP3522644

Availability:: In Stock

Price:: $32.27

Hose assembly,drain

Easy Part #:: EAP3527325

Availability:: In Stock

Price:: $79.63

Washer tub bearing (tub bearing. This parts is very difficult to install. The manufacturer recommends replacing the complete rear tub and bearing assembly.)

Tub bearing. This part is very difficult to install. The manufacturer recommends replacing the complete rear tub and bearing assembly.

Easy Part #:: EAP11711139

Availability:: On Order

Price:: $72.25

Motor assembly,ac,pump (circulation or drain pump assembly. This pump is found on both washing machines and dishwashers. On washing machines, this pump is used to circulate t)

The circulation pump is used in both washers and dishwashers. In the washer, the pump is used to circulate the water during operation. In the dishwasher, the pump is used to drain the water from the dishwasher. If the circulation pump stops working, it will prevent the washer and dishwasher from working properly and will need to be replaced. This circulation pump is 120 volts, 60Hz and 30 watt and a genuine OEM part. Please remember to disconnect the power and water supply before starting your repair.

Easy Part #:: EAP16223509

Availability:: In Stock

Price:: $123.83

Inner tub with spider arm and shaft (basket)

The shaft is no longer available separately.

Easy Part #:: EAP418295

Availability:: In Stock

Price:: $883.14

Gasket

Easy Part #:: EAP418683

Availability:: No Longer Available

Leg assembly

This levelling leg is a genuine replacement part. It is used to help keep your washing machine stable and balanced. It helps support your appliance. It screws into the base of your washer, and you can thread it in or out to adjust the height. The foot on this leg is made of rubber, which helps with grip, stabilization, and vibration reduction. It is also hexagonal in shape, which allows you to more easily adjust it. This levelling leg features a locknut on the shaft which can be tightened against the bottom of your appliance, this will stop the leg from rotating while you are using your washer. This replacement is sold individually.

Easy Part #:: EAP7788210

Availability:: In Stock

Price:: $45.05

Pump filter (washing machine filter and trap assembly.)

This replacement pump filter, also known as a filter assembly, is a genuine OEM part for your washer or washer/dryer combo. Before beginning this repair, turn off the power and water supply to your washer. The filter assembly may need to be replaced because it is broken or is leaking water. To locate the filter assembly, pry open the small door on the front of the washer, using a flat-blade screwdriver. Unplug the drain hose next to the filter and drain the water into a bucket. Then unscrew the pump filter, and replace with your new one.

Easy Part #:: EAP3522306

Availability:: In Stock

Price:: $30.74

Dispenser assembly (dispenser drawer housing)

Easy Part #:: EAP3524182

Availability:: In Stock

Price:: $83.16

Cap,drain hose (drain hose cap)

This drain hose plug, also known as a hose cap, is a genuine OEM part for your washing machine. This plug caps the drain hose from the pump housing, and helps prevent leaks from your washer. Before beginning this repair, make sure the power and water sources to your washer are shut off. To access the pump housing, open the pump filter cover, pull out the drain hose, remove the old plug and replace it, first draining the remaining water from the drain hose.