A300 Washer Parts List

Search the entire A300 by part description. Keep descriptions simple, e.g. "belt" or "pump". Need help?

Belt kit (pump belt - 40.5 inches long)

There are two belts under a Maytag washer; one for the main drive pulley and one for the water pump. The belt kit includes both the drive belt and the pump belt which are both "V" shaped. The belt connects the drive motor to the drive system to be able to spin the tub basket. If your washer will not agitate, not spin, or not drain, the belt could be worn or damaged and will need to be replaced. This is a genuine OEM kit. Please remember to disconnect the power and shut off the water supply to your washer before starting your repair.

Easy Part #:: EAP2005284

Availability:: In Stock

Price:: $47.38

Mounting stem/tub seal kit (sub 22204012)

This tub seal helps prevent any leaking around the tub and the shaft of your washer. If your washer is leaking you may need to replace the seal. The tub seal is located on the bottom of the outer tub, in the center where the transmission comes through to connect to the agitator. This is a genuine OEM part. Please remember to shut off the water supply and disconnect the power to the washer before starting your repair.

Easy Part #:: EAP2351899

Availability:: On Order

Price:: $116.40

Tub bearing kit (bearing, tub)

The tub bearing kit is used on 2-belt washers. This part helps keep the interior tub spinning correctly. If your washer is leaking, noisy, or shakes and moves, you may need to replace the tub bearing. It is recommended to change the seal kit at the same time you are replacing the tub bearing. This is a genuine OEM part. Remember to disconnect the power and shut off the water supply to the washer before starting your repair.

Easy Part #:: EAP2347235

Availability:: In Stock

Price:: $67.25

Drain pump (pump assembly)

This washing machine drain pump is intended for use with automatic washers that have been manufactured since 1958. The pump itself is made of plastic, though it does come with a metallic belt pulley.

Easy Part #:: EAP11743017

Availability:: In Stock

Price:: $230.51

High temperature adhesive - 2oz. (hi-temp adhesive, 2 o)

This is replacement high temperature adhesive for your washer and dryer. It is designed to hold objects together, and will not disintegrate at a high temperature. This is a 2-ounce tube of adhesive that is sold individually. This is an OEM product sourced directly from the manufacturer.

Easy Part #:: EAP11757492

Availability:: In Stock

Price:: $30.83

Hose clamp

This hose clamp expands from half an inch to an inch in diameter. It is made entirely of metal and is intended for use with Maytag washing machines to secure the end of the drain hose to the pump drain port. Please make sure to disconnect the power to your washer before you start your repair. This hose clamp is a genuine OEM part and is sold individually.

Easy Part #:: EAP11743008

Availability:: In Stock

Price:: $9.73

Rubber foot pad

This foot pad is just over an inch in diameter. It is made entirely of rubber and is gray in color. This pad is intended for use with washers and some dryers.

Easy Part #:: EAP11738859

Availability:: In Stock

Price:: $17.55

Rear bearing (ball bearing, radial-)

This part is located near the tub's brake assembly.

Easy Part #:: EAP11739437

Availability:: In Stock

Price:: $23.38

Brake assembly (sub 201190)

The brake assembly aids in the spinning or agitating cycles. The brake keeps the spin basket stationary during agitation while the basket stops at the end of the spin cycle. If your washer is making a loud squeaky sound or not spinning, you might need to replace the brake assembly. This is a genuine OEM part. Please remember to shut off the water supply and disconnect the power to your appliance before starting your repair.

Easy Part #:: EAP11743016

Availability:: No Longer Available

Hose clamp

This single hose clamp is used to hold the water hose in place on the pump, to avoid the hose or pump from leaking water. If you notice your washer leaking you may need to replace the clamp. Please remember to disconnect the power and water supply before starting your repair. This is a genuine OEM part.

Easy Part #:: EAP11740613

Availability:: In Stock

Price:: $12.75

Glide and spring kit (roller)

This glide and spring kit contains two three inch springs, four one inch square glides, and two tubes springs. This kit replaces older style round roller glides.

Easy Part #:: EAP2017149

Availability:: In Stock

Price:: $66.60

Agitator drive shaft seal (seal, agitator drive)

This shaft seal comes filled with grease on the inside, and is used for washing machines.

Easy Part #:: EAP11743014

Availability:: In Stock

Price:: $24.11

Outer tub to pump hose (sub 212989)

Easy Part #:: EAP11757507

Availability:: In Stock

Price:: $70.81

Screw, 8/18 x 3/8 (screw, 10-24 3/8)

This screw is sold individually.

Easy Part #:: EAP11746840

Availability:: In Stock

Price:: $6.22

Adjustable leveling leg (sub 302699)

The adjustable leveling leg is used to support and keep your washer level. If your washer shakes and moves during cycles you may need to replace the leveling leg. The stop nut is included with the leveling leg. The rubber foot is not included, it must be ordered separately. Order the quantity you need as they are sold individually. This is a genuine OEM part.