Hello!

You're visiting the Easy Appliance Parts site in Canada.

Would you like to shop on the U.S. site?

Go to U.S. site
Stay on this site

DBVH512GFG GE Dryer Parts List

Search the entire DBVH512GFG by part description. Keep descriptions simple, e.g. "belt" or "pump". Need help?
< PREV 1 2 3 4 5 6 7
1-15 of 104

Drum bearing slide - white (sold individually) (dryer drum slide. Sold individually. The dryer's drum slides help to support the front of the drum as it rotates. If the drum slides are worn out, the)

This single white drum bearing slide attaches to the outer-most sides of the bearing to help support the front of the drum as it rotates. If your dryer is making loud noises or the drum will not tumble, you many need to replace the slides. The manufacturer recommends replacing both slides at the same time; there are 2 slides per dryer. This is a genuine OEM part. Please make sure to disconnect power to the dryer before starting your repair.

Easy Part #:
EAP755842
Availability:
Special Order
Price:
$9.80

Drum bearing slide Green (sold individually) (dryer drum slide. There are two of these needed on your dryer. These go on the inner most slots on the front bearing. Sold individually will need to p)

This single green drum bearing slide attaches to the outer-most sides of the bearing to help support the front of the drum as it rotates. If your dryer is making loud noises or the drum won?t tumble you many need to replace the slides. The manufacturer recommends replacing both slides at the same time. There are 2 slides per dryer. This is a genuine OEM part. Please make sure to disconnect the power to the dryer before starting your repair.

Easy Part #:
EAP6447706
Availability:
Special Order
Price:
$18.17

Drive belt (dryer drum drive belt, 89-1/2 inches long, 4 ribs.)

This dryer drum drive belt is 89.5" long and has four ribs. This part helps spin the drum during the drying cycle.

Easy Part #:
EAP16542496
Availability:
Special Order
Price:
$34.08

Top bearing (dryer top bearing retainer for dryer drum. If the dryer is noisy then this glide retainer and the glides are probably worn.)

The drum slides are not included with this part. The top bearing helps your dryer operate as quietly as possible. This part will require two green drum slides and 2 white drum slides.

Easy Part #:
EAP1766010
Availability:
Special Order
Price:
$87.12

Door latch (dryer door catch kit)

This part helps to keep the door closed while the machine is running.

Easy Part #:
EAP3502777
Availability:
Special Order
Price:
$13.07

Drum bearing sleeve (dryer drum rear bearing sleeve.)

Sold individually.

Easy Part #:
EAP266777
Availability:
Special Order
Price:
$8.19

Rear drum bearing kit (rear drum bearing kit. *bearing plate has slot in it for ground strap. The drum bearing supports the rear of the dryer drum. Over time, the drum beari)

This rear drum bearing kit comes with a shaft, bearing and installation instructions. The bearing plate comes with a slot in it for the ground strap. Over time the drum bearing will wear out, once it has the dryer may make some noise and the drum bearing will need to be replaced. This kit will help keep your dryer running as smoothly as possible with as little noise as possible. This is a genuine OEM part. Please remember to disconnect the power to your appliance before starting your repair.

Easy Part #:
EAP267529
Availability:
No Longer Available

Adjustable leveling screw (leveling leg, adjustable)

The adjustable leveling screws on the bottom of your dryer can be screwed in or out to lower or raise the leg level. If one of the leveling screws is stripped, damaged, or missing, you may not be able to create a level base for your dryer. The leveling screw has a hexagon-shaped gray plastic foot, with a screw that is approximately 1 inch in length. To replace a damaged screw, simply turn the old screw to the left, until it can be removed. Then, simply screw the new leveling screw into place on the bottom of the dryer, making sure it is the same height as the other 3 leveling screws.

Easy Part #:
EAP1021358
Availability:
Special Order
Price:
$9.97

Door strike (dryer door strike.)

TThe door strike for your dryer is mounted on the dryer frame that the door shuts onto. It fits into the door catch on the door and keeps the door closed. If the door strike is damaged or missing, the door will not lock properly and not only will this cause the door to swing open, but it won’t allow the dryer to start properly. It is a small piece of metal, about 1 inch in length and is sold individually.

Easy Part #:
EAP266893
Availability:
Special Order
Price:
$9.81

Light bulb

This 10W - 120V light bulb is used on the inside of your dryer to provide light when the door is open. It is clear in color and has a standard screw-in base. If your current bulb is burnt out or broken you will need to replace it. This bulb is a genuine OEM part and is sold individually.

Easy Part #:
EAP10063224
Availability:
No Longer Available

Retainer o-ring (o ring)

This is a replacement O-ring for the drum bearing retainer on your dryer. The drum bearing is found at the back of the dryer drum. The O-ring is designed to create a seal on the drum bearing. The O-ring is made of rubber, and can occasionally wear down and break. If you notice that your dryer drum bearing is worn while you’re replacing the O-ring, you should consider replacing it as well. This product is sold individually, and is an OEM part from the manufacturer.

Easy Part #:
EAP266776
Availability:
Special Order
Price:
$29.38

Door switch

A door switch is a simple on/off mechanism that prohibits the dryer from operating when the door is open.

Easy Part #:
EAP2344321
Availability:
Special Order
Price:
$35.35

Natural gas to liquid propane conversion kit (two-coil gas valve conversion kit. This kit converts a dryer from running on natural gas to liquid propane. Instructions are included.)

This conversion kit changes the dryer from natural gas to liquid propane. Installation instructions are included.

Easy Part #:
EAP267591
Availability:
Special Order
Price:
$90.24

Inlet control thermostat (inlet control thermistor.Resistence reading should be around 100k ohms at room temperature and decrease with temperature rise.)

This part is located on the housing for the heating element.

Easy Part #:
EAP1766014
Availability:
Special Order
Price:
$25.23

M - series secondary coil - 2 terminals (dryer gas valve solenoid coil. Has two terminals.)

This part is the replacement main valve coil for your dryer. It is black and white in color and has 2 terminals. It is approximately 1 inch long and 1 inch wide. The main valve coil opens the gas valves while the dryer is running. This coil is used with two coil gas shut off valve assemblies. Be sure to turn off the gas before you begin this repair. This part is sold individually and is a genuine OEM part sourced directly from the manufacturer.

Easy Part #:
EAP268154
Availability:
Special Order
Price:
$69.32
< PREV 1 2 3 4 5 6 7
1-15 of 104