JBP15WJW GE Range Parts List

Search the entire JBP15WJW by part description. Keep descriptions simple, e.g. "belt" or "pump". Need help?

Bake element - push on terminals - 240v (oven bake heating element. Push-on wire terminals. Includes feet for sitting on bottom of oven floor, and mounting plate for attaching to back wall of)

The bake element is located on the bottom of the oven with male spade terminals and push-on terminals. The bake element provides heat for baking. If your oven is too hot, not heating evenly, element is not heating, or little to no heat when baking, you may need to replace your bake element. This is a genuine OEM part. Please remember to disconnect the power to the range before starting your repair.

Easy Part #:: EAP249238

Availability:: Special Order

Price:: $140.00

Drip bowl - 8 inch (burner drip bowl (or drip pan) for 8-inch burner. The drip pan sits underneath the heating element to collect drips or spills around the burner.)

This eight inch drip bowl is chrome in color and measures approximately 10 inches in diameter at the widest point. The drip bowl is used to catch anything that may spill over to make cleaning up a little quicker. Over time the drip bowl may become rusty, burnt, or worn down, and will need to be replaced. The drip bowl is a genuine OEM part and is sold individually.

Easy Part #:: EAP244395

Availability:: Special Order

Price:: $36.81

Surface burner terminal block kit (stove top heating element terminal block kit (receptacle).)

This kit includes the female contact with wires, terminal block and mounting clip.

Easy Part #:: EAP783534

Availability:: Special Order

Price:: $78.76

Drip bowl - 6 inch (burner drip bowl (also called a drip pan) for 6-inch burner. The drip pan sits underneath the heating element to collect drips or spills around the bu)

This 6-inch chrome drip bowl measures about eight inches in diameter at the widest point at the top. This drip bowl is used to catch any drippings or food that falls/spills while cooking. This chrome drip bowl is compatible with most electric ranges that utilize plug-in surface burners. If the drip bowl becomes rusted or damaged, you should replace it to avoid any grease or food that could drop down inside the range. This is a genuine OEM part and is sold individually.

Easy Part #:: EAP244394

Availability:: Special Order

Price:: $35.28

Light bulb - 40w (40 watt clear appliance bulb)

This 40-Watt light bulb is sold individually and is a genuine OEM replacement option for your home appliances. It is specially designed to withstand extreme temperatures, so this bulb is compatible with a variety of appliance types including refrigerators, ranges, microwaves, and dryers. It features a frosted glass bulb with a standard metal socket base, which allows you to easily unscrew the burnt-out light and twist the new bulb into place. Depending on your appliance, there may be a guard or cover protecting the lightbulb, in which case you may require additional tools to remove the cover. We recommend disconnecting the power supply to your appliance before changing the lightbulb.

Easy Part #:: EAP217532

Availability:: Special Order

Price:: $4.88

Surface burner terminal block kit (range/stove terminal block (receptacle) kit. The surface element plugs onto this receptacle. If the receptacle's contacts are burned out, the surface)

Also known as receptacle.

Easy Part #:: EAP242972

Availability:: Special Order

Price:: $36.31

Oven rack (oven rack.)

This single chrome oven rack provides a reliable flat cooking surface for your cookware inside of the oven cavity. The oven rack is made of metal and measures approximately 24” wide by 17 1/2” deep. This is a genuine OEM part and is sold individually. Please order quantity needed.

Easy Part #:: EAP6447646

Availability:: Special Order

Price:: $85.53

Foot - leveller (plastic leveling leg)

Sold individually.

Easy Part #:: EAP223802

Availability:: Special Order

Price:: $26.92

Lens (indicator light lens)

This part is a replacement lens for your oven or range. The lens is red in color, and when the elements are turned on, the light behind the lens will turn on to inform the user that the element is, in fact, on. The lens is a little less than half an inch in diameter and is made of plastic. If the light behind the lens still works, you should be able to simply remove the front panel and pop the damaged lens out of position, then replace it with the new one. This part is sold individually and is an OEM part sourced directly from the manufacturer.

Easy Part #:: EAP1020380

Availability:: Special Order

Price:: $9.83

Oven door large window kit (oven door glass kit.)

This kit contains 2 glass panels with a steel window spacer.

Easy Part #:: EAP251939

Availability:: Special Order

Price:: $173.47

Bottom trim - white (lower door trim)

Screws not included.

Easy Part #:: EAP2321159

Availability:: Special Order

Price:: $29.21

Receptacle push-in (porcelain oven light socket)

This part is the replacement light socket for your oven. The oven light socket provides power to the light, and at the same time holds the light bulb in place.

Easy Part #:: EAP752188

Availability:: Special Order

Price:: $12.89

Screw

Size: 10-32 GXTT FLP .595 Sold individually.

Easy Part #:: EAP283515

Availability:: Special Order

Price:: $7.32

Drawer glider (glider drwr)

Easy Part #:: EAP241689

Availability:: Special Order

Price:: $12.87

Light cover (lamp cover assembly)

The oven bulb lens cover is made of glass and is approximately 2.75 inches in diameter. The lens cover protects the light bulb from being damaged. If the lens is cracked, damaged, or missing it will need to be replaced. It is suggested to make sure that the lens cover is cool to the touch before you start this repair. To remove the bulb lens cover simply slide the retaining clip off and then remove the lens. Replace it with a new cover and slide the retaining clip back on to hold it into place. This is an OEM part sourced from the manufacturer.