PDW8900NW GE Dishwasher Parts List

Search the entire PDW8900NW by part description. Keep descriptions simple, e.g. "belt" or "pump". Need help?

Adaptor pump assembly (check valve for pump)

This part is the replacement adaptor pump assembly, also known as the check valve and hose assembly for your dishwasher. It is made of white and brown plastic, and is approximately 4 ½ inches long, 1 ¼ inches wide and the opening at the top is about an inch in diameter. The adaptor pump assembly connects the sump and the drain pump, and prevents dirty water from getting back in. If it cracks, it can cause a water leak, and will need to be replaced. This part is sold individually and is an authentic OEM part sourced directly from the manufacturer.

Easy Part #:: EAP1019542

Availability:: Special Order

Price:: $66.87

Hinge cable pulley (pulley, hinge cable)

Aids in the opening and closing of the dishwasher door.

Easy Part #:: EAP958801

Availability:: Special Order

Price:: $44.44

Middle spray arm (arm spray mid asm)

This part is the replacement for the middle spray arm in your dishwasher. The middle spray arm is mounted on the bottom of the middle dish rack, and it should rotate and spray water during the operating cycle. If your spray arm is clogged or damaged, the spray arm will need to be replaced. Debris and hard water buildup in your dishwasher is often the cause of a clogged spray arm. To replace the spray arm, simply turn the arm counter clockwise to release it from the dish rack. Then, screw in the new spray arm and your repair is complete. This part is sold individually.

Easy Part #:: EAP1016904

Availability:: Special Order

Price:: $64.76

Drain tube kit (drain hose assembly with black rubber end fittings. Approximately 76 inches in length.)

This kit includes the drain hose with black rubber end fittings and a clamp.

Easy Part #:: EAP2339994

Availability:: Special Order

Price:: $62.44

Upper rack end cap (cap end - rack slide)

This end cap is sold individually. It is the same end cap used on the right and left side, for both front and back. It attaches to the end of the upper rack slide rail, and prevents the rack from falling when being pulled out too far.

Easy Part #:: EAP958986

Availability:: Special Order

Price:: $19.71

Check valve flapper (check flapper valve, pump inlet)

This part allows the water to flow in the drain direction only and prevents the dirty water from coming back into the tub.

Easy Part #:: EAP258167

Availability:: Special Order

Price:: $21.28

Upper spray arm bearing

This is the upper spray arm bearing for your dishwasher. The spray arm fits onto the spray arm bearing, which allows it to spin during the cycle. If your dishwasher is not cleaning dishes properly, or is making a lot of noise during operation, it could be the result of a damaged spray arm bearing. This part is made of white plastic and is approximately 1 inch long and 1/2 inch wide. This part is sold individually and is a genuine OEM part from the manufacturer.

Easy Part #:: EAP2353863

Availability:: Special Order

Price:: $9.83

Circulation pump impeller kit (impeller and motor shaft seal kit, circulation pump)

Easy Part #:: EAP1017766

Availability:: Special Order

Price:: $110.24

Lower rack wheel (roller for lower dishwasher dishrack. This part has been updated by the manufacturer and may be slightly wider than the original part.)

This slotted wheel is sold individually. It is white in color and does not come with the attaching axle. This part has been redesigned, and may be wider than the original.

Easy Part #:: EAP2322303

Availability:: Special Order

Price:: $7.22

Cage roller bearing assembly (cage and roller bearing assembly)

Aides with movement or sliding of the dishrack.

Easy Part #:: EAP959485

Availability:: Special Order

Price:: $82.73

Drain pump (pump drain asm)

The pump ejects the water from the dishwasher.

Easy Part #:: EAP2353893

Availability:: No Longer Available

Lower spray arm bearing (spray arm bearing, lower)

This part is a replacement lower spray arm bearing for your dishwasher. It is made of gray plastic and is approximately ½ inch in diameter. The spray arm bearing reduces friction and allows the spray arm to rotate during the operating cycle. If the spray arm is not rotating or cleaning dishes properly, or the dishwasher is noisy during operation, you may need to replace the spray arm bearing. This is a bearing for the middle spray arm, which is mounted to the bottom of the upper dish rack. The bearing is made of metal and is approximately one inch in diameter. This part is sold individually and is an OEM part.

Easy Part #:: EAP258123

Availability:: Special Order

Price:: $9.83

Scr b-16 hxw 1/2 stainless steel (bearing mid spray arm)

This part is a replacement middle spray arm bearing for your dishwasher. The spray arm bearing reduces friction and allows the spray arm to rotate during the operating cycle. If the spray arm is not rotating or cleaning dishes properly, or is noisy during operation, you may need to replace the spray arm bearing. This is a bearing for the middle spray arm, which is mounted to the bottom of the upper dish rack. The bearing is made of metal and is approximately one inch in diameter. This part is sold individually and is an OEM part.

Easy Part #:: EAP2370492

Availability:: Special Order

Price:: $14.17

Side trim gasket (trim gasket)

This part is the replacement side trim gasket for your dishwasher. It is black in color and is approximately 24 inches long and 1 inch wide. The gasket runs along the side of your dishwasher, between the dishwasher and the cabinet. It is used for aesthetic purposes, and also as a sound curtain. The main reason you would want to replace the door seal is if it is torn or missing. You will need a Phillips-head screwdriver to remove the dishwasher from the cabinet for this repair. This part is sold individually and is an OEM part from the manufacturer.