WKGX201HBA LG Washer Dryer Combo Parts List

Search the entire WKGX201HBA by part description. Keep descriptions simple, e.g. "belt" or "pump". Need help?

Parts assembly, svc (2 pack) (roller assembly)

The drum support roller for your dryer holds the drum in place while the drum turns on the support wheels. The drum roller is round with a bearing in the middle and measures approximately 3 inches in diameter. If the dryer is noisy, won’t tumble, or takes too long to dry, you might need to replace the support roller. It is recommended that you replace both rollers at once. The bearing inside this roller is self-lubricating, so no grease will be required. Please remember to disconnect the power to your appliance before starting your repair. This is a genuine OEM part.

Easy Part #:: EAP16763594

Availability:: In Stock

Price:: $147.18

Washer hose with bellows

This washer hose with bellows, also known as a dispenser hose, is a genuine OEM replacement part for your washer. Replacing this part can be helpful if your washer is leaking. The dispenser hose connects the dispenser assembly to the tub. Before beginning the repair, unplug the washer and turn off the water supply. You will need a Phillips head screwdriver to complete this repair; a clamp tool can also be helpful. Remove the screws holding the lid of the washer in place, and take off the lid. Locate the dispenser hose and remove its clamps. Place the clamps on the new hose, using the arrows for a guide in positioning the clamps. Install the new hose and reassemble all other parts.

Easy Part #:: EAP3523347

Availability:: In Stock

Price:: $55.87

Lint screen housing

This is an authentic dryer lint filter cover sourced directly from the manufacturer. It protects the more delicate lint filter in your dryer, so that it doesn’t get damaged and lint can’t mix in with your clothes. This product is gray in color and is made of plastic. It is sold individually. The manufacture has modified the part and suggests replacing the filter guide also. Please see your specific model information to locate the filter guide.

Easy Part #:: EAP3534930

Availability:: In Stock

Price:: $67.02

Moisture sensor

The moisture sensor, also known as a humidity sensor, works in conjunction with your dryer by helping determine the amount of moisture in the drum to reduce overdrying. If the timer doesn’t advance correctly, it is suggested to check the moisture sensor bar for damage. A damaged sensor can cause the automatic drying cycle to not work properly and will need to be replaced. This is a genuine OEM part. Please remember to disconnect the power to the dryer before starting this repair.

Easy Part #:: EAP3529161

Availability:: In Stock

Price:: $25.59

Damper assembly,friction

Easy Part #:: EAP11707466

Availability:: In Stock

Price:: $56.92

Dryer drum belt

The drive belt is made to wrap around the drum, working with the tension pulley to rotate the drum. If your dryer drum won’t turn, then you may need to replace your belt. This drive belt is ¼” wide with 4 ribs and 3 grooves. It is recommended to disconnect the power to your dryer before you start your repair. This drive belt is a genuine OEM part.

Easy Part #:: EAP11705916

Availability:: In Stock

Price:: $73.24

High limit thermostat and thermistor kit (parts assembly,svc)

The thermistor, with wire harness, helps regulate and monitor the temperature inside of the dryer. The thermistor attaches onto the blower housing. If your dryer has a short drying time or a fault code is flashing, the thermistor maybe defective and will need to be replaced. Please remember to disconnect the power to the dryer before starting the repair. This is a genuine OEM part.

Easy Part #:: EAP16878105

Availability:: In Stock

Price:: $102.77

Side venting kit

Easy Part #:: EAP3575086

Availability:: In Stock

Price:: $223.85

Filter guide

This is a replacement lint screen guide for your dryer. The lint screen guide attaches to the front bulkhead and supports the lint screen. If your lint screen will not stay in place, or if you are noticing marks left on your clothes, a broken lint screen guide could be to blame. The lint screen guide is approximately 13 inches wide on its straight edge. It is made of plastic and is sold individually. This is an OEM part, directly from the manufacturer.

Easy Part #:: EAP3535278

Availability:: In Stock

Price:: $49.21

Felt seal

Easy Part #:: EAP3522851

Availability:: In Stock

Price:: $55.66

Gasket

This part is the replacement rear tub gasket for your washer. It is made of black plastic and is approximately 3-1/4 inches in diameter. The rear tub gasket forms a watertight seal between the rear tub and the drive shaft. If the gasket is worn or damaged, it may not be able to create this seal, and you may experience a water leak from your washer. Be sure to disconnect the washer from the water and power sources before you begin this repair. This is an OEM part sourced directly from the manufacturer and it is sold individually.

Easy Part #:: EAP3535219

Availability:: In Stock

Price:: $35.36

Rack

Easy Part #:: EAP3521801

Availability:: In Stock

Price:: $82.57

Blower thermostat

The blower housing exhaust thermostat works in conjunction with your dryer by helping to regulate the temperature inside of the dryer drum. The thermostat will turn the heat off and on to help maintain the required temperature in the drum. If your dryer is not heating the thermostat may have shorted out and will need to be replaced. This is a genuine OEM part. Please remember to shut the power off to the dryer before starting the repair.